Certain 3E-5239 Relay Assemblies May Fail Caterpillar

Certain 3E-5239 Relay Assemblies May Fail

Usage:

Certain <a class="catalog_a_num" href="https://avspare.com/caterpillar/relay/3e5239/">3E-5239</a> Relay Assemblies May Fail

CONFIDENTIAL TIBU3849-00

Show/hide table

TECHNICAL INFORMATION BULLETIN	May 07, 2003
All Caterpillar Products
	Component Code: 4493

SUBJECT: Certain 3E-5239 Relay Assemblies May Fail

PROBLEM:

Some 3E-5239 Relay Assemblies with the date code 0247 are defective and may fail. The 3E-5239 Relay Assembly is widely used in various applications. Refer to Illustration 1 for the location of the date code.

SOLUTION:

If a defective 3E-5239 Relay Assembly is suspected, turn the key switch to the OFF position and disconnect the relay from the circuit. Use a Caterpillar 146-4080 Multimeter (or equivalent) to measure the coil resistance of the relay. The coil is connected to Terminal 85 and Terminal 86. The correct coil resistance is in the range of 320 Ohms to 400 Ohms. The defective relays have a coil resistance of 80 Ohms to 100 Ohms. A defective relay coil may also measure open circuit or shorted. Replace the relay if necessary.

Illustration 1. Location of the date code.

COPYRIGHT 2003 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Check Bolt Torque on Flex Plates of Certain 3508B Single Bearing Generator Sets Check Bolt Torque on Flex Plates of Certain 3508B Single Bearing Generator Sets

Interference From The Hose Routing Of The Fuel Return Hose Interference From The Hose Routing Of The Fuel Return Hose

AIR FILTER CLOGGED (EVENT CODE E272) EVENT ERRONEOUSLY LOGGED ON M300C-SERIES WHEELED EXCAVATORS AIR FILTER CLOGGED (EVENT CODE E272) EVENT ERRONEOUSLY LOGGED ON M300C-SERIES WHEELED EXCAVATORS

A New Relief Valve May Improve The Transmission Hydraulic Control Pressure On Certain M325B Material Handlers A New Relief Valve May Improve The Transmission Hydraulic Control Pressure On Certain M325B Material Handlers

PRIMER/PAINT ON THE FINISHED SURFACE OF CYLINDER RODS FOR SOME WORK TOOLS PRIMER/PAINT ON THE FINISHED SURFACE OF CYLINDER RODS FOR SOME WORK TOOLS

Improvements To The Heating Ventilating And Air Conditioning (HVAC) System Increase Operator Comfort Improvements To The Heating Ventilating And Air Conditioning (HVAC) System Increase Operator Comfort

Loose Connections on Voltage Regulators Can Lead to Above Normal Voltage Output and Regulator Failure Loose Connections on Voltage Regulators Can Lead to Above Normal Voltage Output and Regulator Failure

Check For Clearance When Installing New Electric Starting Motors Check For Clearance When Installing New Electric Starting Motors

Use of the 9Y-5710 Auxiliary Sea Water Pump in 3500 and 3500B applications Use of the 9Y-5710 Auxiliary Sea Water Pump in 3500 and 3500B applications

Automatic Engine Control Regulates Erratically on M300C-Series Wheeled Excavators Automatic Engine Control Regulates Erratically on M300C-Series Wheeled Excavators

Engine Speed Hunting on WEX M300C Series Engine Speed Hunting on WEX M300C Series

MODIFICATION TO PREVENT OIL BLOWING THROUGH THE 165-8460 VENT AS. MODIFICATION TO PREVENT OIL BLOWING THROUGH THE 165-8460 VENT AS.

Bracket Adjustment Improves The Seal Of The Cab Windshield Bracket Adjustment Improves The Seal Of The Cab Windshield

INTERFERENCE BETWEEN THE LIFT ARMS ; CERTAIN WORK TOOLS INTERFERENCE BETWEEN THE LIFT ARMS & CERTAIN WORK TOOLS

Procedure For The Preload Of The Bearings In The Final Drive Procedure For The Preload Of The Bearings In The Final Drive

MAIN CONTROL VALVE PLUGS LEAKS ON M300C-SERIES WHEELED EXCAVATORS MAIN CONTROL VALVE PLUGS LEAKS ON M300C-SERIES WHEELED EXCAVATORS

MODIFICATIONS ARE NECESSARY IN ORDER TO USE THE 165-9889 BROOM BRACKET GP ON ALPHA XR MACHINES MODIFICATIONS ARE NECESSARY IN ORDER TO USE THE 165-9889 BROOM BRACKET GP ON ALPHA XR MACHINES

EXPANSION/SPLITTING OF THE STICK AS A RESULT OF WATER ENTERING THE STICK AND FREEZING DURING EXTREME COLD WEATHER CONDITIONS EXPANSION/SPLITTING OF THE STICK AS A RESULT OF WATER ENTERING THE STICK AND FREEZING DURING EXTREME COLD WEATHER CONDITIONS

Governor Motor Governor Motor

A Shuttle Valve In The Main Hydraulic Control Valve May Cause Error Code 1192-07 And Hydraulic Function Shutdown A Shuttle Valve In The Main Hydraulic Control Valve May Cause Error Code 1192-07 And Hydraulic Function Shutdown

Shock Hazard for the VR-6 and K65-12B Voltage Regulators Shock Hazard for the VR-6 and K65-12B Voltage Regulators

HESITATION TO THE LEFT DURING SWING INITIATION HESITATION TO THE LEFT DURING SWING INITIATION

Troubleshooting Guide For Boom Or Stick Drop, Implement Drift, Or A Powered Movement Of Any Implement On Certan Excavators Troubleshooting Guide For Boom Or Stick Drop, Implement Drift, Or A Powered Movement Of Any Implement On Certan Excavators

3-PIECE EXHAUST MANIFOLD ASSEMBLIES ON 3056E ENGINES INSTALLED IN M300C SERIES WHEELED EXCAVATORS 3-PIECE EXHAUST MANIFOLD ASSEMBLIES ON 3056E ENGINES INSTALLED IN M300C SERIES WHEELED EXCAVATORS