Surface Cracks Found In 138-7574 Link Bracket Caterpillar


Surface Cracks Found In 138-7574 Link Bracket

Usage:

Surface Cracks Found In <a class="catalog_a_num" href="https://avspare.com/caterpillar/bracket/1387574/">138-7574</a> Link Bracket

CONFIDENTIAL TIBU2640-00

TECHNICAL INFORMATION BULLETIN

August 28, 2002

All Caterpillar Product

 
 

Component Code 1408

SUBJECT: Surface Cracks Found In 138-7574 Link Bracket

PROBLEM:

Caterpillar has been informed that three 138-7574 Link have been found to have surface cracks. The cracks were found in the link portion of the tool prior to the tool being used.

This link bracket is a three piece tool consisting of a bracket and two chain links. This tool is used to lift components during maintenance and repairs of equipment.

(A) 163-6455 Link Bracket

(B) 138-7576 Link Bracket

(C) 138-7574 Link Bracket

(D) 138-7575 Link Bracket

(E) 138-7573 Link Bracket

The link with the largest cracks was tested for lifting capability and it passed the load test which exceeded the rating of the tool. Only the 138-7574 Link Bracket have reports of cracking, however there are other link brackets with similar functions. The other part numbers are 138-7573, 138-7575, 138-7576 and 163-6455.

Caterpillar has inspected several link brackets in stock and has not found any cracks.

 

SOLUTION:

Please inspect all 138-7573, 138-7574, 138-7575, 138-7576 and 163-6455 link brackets in your inventory or in your operation (using Magna flux or dye penetrant detection methods ) and report any incidents of cracked links to the CSTG Hotline (309-675-6277)

Replace the cracked Link Bracket, file a warranty claim for any cracked link brackets and return all cracked link brackets to CSTG.

Caterpillar Service Technology Group

LC2184

501 SW Jefferson Avenue

Peoria, IL 61630-2184

Note: Visual Inspection of all lifting devices is to be performed immediately prior to usage by service technicians.

COPYRIGHT 2002 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Cab Mounting Group May Not Assembly Properly Cab Mounting Group May Not Assembly Properly
Water May Leak Into The Cab Or Canopy Water May Leak Into The Cab Or Canopy
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
Check Orientation Of Hydraulic Oil Filter Base Check Orientation Of Hydraulic Oil Filter Base
Air Cleaner Mounting Band May Loosen And Rattle Air Cleaner Mounting Band May Loosen And Rattle
Machining Premachined Valve Seat Inserts Machining Premachined Valve Seat Inserts
3300 Engine Oil Level Maintenance And High Oil Consumption 3300 Engine Oil Level Maintenance And High Oil Consumption
Rust At The Threaded Openings Of Air Conditioning Accumulators Could Cause A Restriction Of The A/C System Rust At The Threaded Openings Of Air Conditioning Accumulators Could Cause A Restriction Of The A/C System
New Swing Brake Cylinder Requires Removal Of Air Bleed Valve In Order To Be Installed Correctly New Swing Brake Cylinder Requires Removal Of Air Bleed Valve In Order To Be Installed Correctly
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Shuttle Valve Failure Causing Malfunction Of Main Hydraulic Pump Shuttle Valve Failure Causing Malfunction Of Main Hydraulic Pump
3306 Engine Oil Pan Plate Leaks 3306 Engine Oil Pan Plate Leaks
Reroute Oil Supply for Custom Autolube Pump Reroute Oil Supply for Custom Autolube Pump
Additions to Service Maintenance Interval for Suspension Cylinders on Off-Highway Trucks Additions to Service Maintenance Interval for Suspension Cylinders on Off-Highway Trucks
Certain Air Dryers Should be Removed From Dealer Inventory Certain Air Dryers Should be Removed From Dealer Inventory
224-7252 XT-6 ES HOSE ASSEMBLY WILL NOT FIT CORRECTLY 224-7252 XT-6 ES HOSE ASSEMBLY WILL NOT FIT CORRECTLY
OPERATION OF BUCKET MAY EXPERIENCE A CYCLING SURGE OPERATION OF BUCKET MAY EXPERIENCE A CYCLING SURGE
HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST
Certain Wheel-Tractor Scrapers May Experience Leadking at the Final Drive Oil Drain Hole Certain Wheel-Tractor Scrapers May Experience Leadking at the Final Drive Oil Drain Hole
Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding
THE WELD BETWEEN THE TOP PLATE AND THE SIDE PLATE BELOW THE STICK BRACKETS MAY CRACK THE WELD BETWEEN THE TOP PLATE AND THE SIDE PLATE BELOW THE STICK BRACKETS MAY CRACK
Some Pumps May Have the Incorrect Actuator Some Pumps May Have the Incorrect Actuator
DISASSEMBLY OF THE STICK CYLINDERS AND OF THE BUCKET CYLINDERS MAY BE DIFFICULT DISASSEMBLY OF THE STICK CYLINDERS AND OF THE BUCKET CYLINDERS MAY BE DIFFICULT
FINAL DRIVE SPINDLE BEARINGS MAY FAIL FINAL DRIVE SPINDLE BEARINGS MAY FAIL
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.