PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN PUMP BEARING ON CERTAIN M313D AND M315D2 WHEELED EXCAVATORS Caterpillar

PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN PUMP BEARING ON CERTAIN M313D AND M315D2 WHEELED EXCAVATORS

Usage:

TEBE5201-00

Show/hide table

21Nov2016

J080
Z800

Show/hide table

Before/After (Limited distribution)	PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN PUMP BEARING ON CERTAIN M313D AND M315D2 WHEELED EXCAVATORS
5070		PS45292

Show/hide table

NOTE:

Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.

NOTE:

This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS45292" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

Show/hide table

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

Show/hide table

TERMINATION DATE

30Nov2018

PROBLEM

Show/hide table

The existing main pump bearing can experience early wear and fail on certain M313D and M315D2 Wheeled Excavators. If the existing main pump bearing fails, it will lead to leakage of oil at the main pump and further pump damage. A typical failure occurs around 1400 hours.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
M313D	J3A00130-00131, 133-134, 150, 154, 159, 162, 165, 170, 175, 182, 198, 204, 216-217, 222, 226, 229, 238, 260, 266-267, 276-277, 279, 284, 287-288, 291, 297, 300, 315, 325, 333, 339, 487, 491, 493, 497-498, 502-503, 506, 508, 512, 514, 519-521, 523-524, 526, 533, 535, 537, 540-542, 545-546, 548-550, 554-555, 557-561, 564-565, 567, 569, 574, 579, 581-584, 587, 593 W3H00871, 874-875, 877-885, 887, 889-890, 892-893, 895-896, 898-902, 904-905, 908-909, 5543, 5546, 5549, 5551
M315D 2	CH300231-00239, 243-245, 252-257, 260, 264, 271-273, 275-276, 278-282, 284-285, 287-288, 290-291, 293-294, 299, 328

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
1	1307804	SHAFT
1	3411442	SEAL-LIP TYPE
1	5032050	BEARING
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table

Replace existing 130-7814 Bearing with a new 503-2050 Bearing. The 503-2050 is a coated bearing that has higher resistance against early wear. Refer to KENR6025 or KENR6028, Disassembly and Assembly, "Main Hydraulic Pump - Disassemble" and "Main Hydraulic Pump - Assemble."

Show/hide table

SERVICE CLAIM ALLOWANCES

Show/hide table

Product smu/age whichever comes first	Caterpillar		Dealer Suggested		Customer Suggested
Product smu/age whichever comes first	Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
0-4000 hrs, 0-48 mo	100.0%	100.0%	0.0%	0.0%	0.0%	0.0%

Show/hide table

NOTE: This is a 8.0-hour job
Note: An additional 2.0 hours will be allowed for an After Failure repair. To justify claiming resultant damage parts cost, pictures (showing the failed parts) must be attached to the claim.

Show/hide table