PRODUCT SUPPORT PROGRAM FOR REWORK OF THE BOOM NOSE ON CERTAIN 313D2 LGP EXCAVATORS
Usage:
TEBE4011-00
Show/hide table
| 14Jan2016 |
A-20
D-21
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REWORK OF THE BOOM NOSE ON CERTAIN 313D2 LGP EXCAVATORS |
|
| 6501 | PS53123 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53123" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jan2018 |
PROBLEM
Show/hide table
| Cracks may occur on the boom nose bracket, initiated along the weld seam between the side plate and the v-section, on certain 313D2 LGP Excavators. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 313D 2 LGP | GAJ00141-00275 RKN00193-00356 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 4779380 | BRACKET AS |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| If the boom and bearing assembly needs to be repaired, refer M0066876, Special Instruction, "Rework Procedure for the Boom Nose on Certain 313D2 LGP Excavators", in order to complete this Rework Procedure for repair. If the boom and bearing assembly needs to be replaced, refer M0065592, Special Instruction, "Procedure to Replace the Bracket Assembly of the Boom Nose on Heavy-Duty Booms for 313D2 LGP Excavators", in order to complete this Rework Procedure for replacement. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-48 mo |
||||||
49-96 mo |
||||||
Show/hide table
| NOTE: This is a 8.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REWORK OF THE VALVE GROUP ON CERTAIN 311F, 312E/F, 313F, 314E, 315F, 316E/F, AND 318E/F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORK OF THE VALVE GROUP ON CERTAIN 311F, 312E/F, 313F, 314E, 315F, 316E/F, AND 318E/F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORK OF THE AFTER COOLER PIPE ASSEMBLY ON CERTAIN 329D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORK OF THE AFTER COOLER PIPE ASSEMBLY ON CERTAIN 329D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST GAS VALVE (NRS) ON CERTAIN ASPHALT PAVERS, EXCAVATORS, WHEELED EXCAVATORS, MOBILE HYDRAULIC POWER UNITS, MOTOR GRADERS, TRACK-TYPE TRACTORS, WHEEL LOADERS, WHEEL FELLER BUNCHERS, WHEEL SKIDDERS, AND I PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST GAS VALVE (NRS) ON CERTAIN ASPHALT PAVERS, EXCAVATORS, WHEELED EXCAVATORS, MOBILE HYDRAULIC POWER UNITS, MOTOR GRADERS, TRACK-TYPE TRACTORS, WHEEL LOADERS, WHEEL FELLER BUNCHERS, WHEEL SKIDDERS, AND I
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST GAS VALVE (NRS) ON CERTAIN CS54B, CP56B, CS56B, CS64B, CS66B, CP68B CS68B, CP74B, CS74B, CS76B, AND CS78B COMPACTORS, 312E, 312F, 314E, 314F, 316E, 316F, 318E, AND 318F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST GAS VALVE (NRS) ON CERTAIN CS54B, CP56B, CS56B, CS64B, CS66B, CP68B CS68B, CP74B, CS74B, CS76B, AND CS78B COMPACTORS, 312E, 312F, 314E, 314F, 316E, 316F, 318E, AND 318F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SLCV SUPPORT ASSEMBLY ON CERTAIN 303E CR MINI HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SLCV SUPPORT ASSEMBLY ON CERTAIN 303E CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FINAL DRIVE BOLTS ON CERTAIN 336D AND 349D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FINAL DRIVE BOLTS ON CERTAIN 336D AND 349D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 10R-7555 WATER PUMPS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 10R-7555 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 377-6969 ENGINE OIL FILTERS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 377-6969 ENGINE OIL FILTERS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL DRIVE GROUP ON CERTAIN 320D AND 323D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL DRIVE GROUP ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORK OF THE A/C COMPRESSOR ON CERTAIN 311F LRR EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORK OF THE A/C COMPRESSOR ON CERTAIN 311F LRR EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MUFFLER ON CERTAIN 312D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MUFFLER ON CERTAIN 312D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEATER CORE ASSEMBLY ON CERTAIN 329E EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEATER CORE ASSEMBLY ON CERTAIN 329E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL PRESSURE SENSOR ON CERTAIN 2570C, 2670C, 563C, AND 573C WHEEL FELLER BUNCHERS, AP1000E, AP1055E, AND BG1000E ASPHALT PAVERS, 120M 2, AND 12M 2 MOTOR GRATERS, 324E AND 329E EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL PRESSURE SENSOR ON CERTAIN 2570C, 2670C, 563C, AND 573C WHEEL FELLER BUNCHERS, AP1000E, AP1055E, AND BG1000E ASPHALT PAVERS, 120M 2, AND 12M 2 MOTOR GRATERS, 324E AND 329E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MUFFLER ON CERTAIN 311D, 312D, AND 313D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MUFFLER ON CERTAIN 311D, 312D, AND 313D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING LOOSE AND/OR BROKEN SWING BEARING BOLTS ON CERTAIN 305.5E AND 306E MINI HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING LOOSE AND/OR BROKEN SWING BEARING BOLTS ON CERTAIN 305.5E AND 306E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR RE-FLASHING THE MONITOR SOFTWARE ON CERTAIN 307E2 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR RE-FLASHING THE MONITOR SOFTWARE ON CERTAIN 307E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOFTWARE AND POSSIBLY REPLACING THE ELECTRONIC UNIT FUEL INJECTORS ON CERTAIN 323D2 EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOFTWARE AND POSSIBLY REPLACING THE ELECTRONIC UNIT FUEL INJECTORS ON CERTAIN 323D2 EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE QUICK COUPLER HYDRAULIC LINES MOUNTING PLATES ON CERTAIN 307E2 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE QUICK COUPLER HYDRAULIC LINES MOUNTING PLATES ON CERTAIN 307E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR CHECKING AND RE-TIGHTENING THE SWING BEARING GEAR GROUP BOLTS ON CERTAIN 312D2 AND 318D2 EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR CHECKING AND RE-TIGHTENING THE SWING BEARING GEAR GROUP BOLTS ON CERTAIN 312D2 AND 318D2 EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR RE-FLASHING THE MACHINE AND ENGINE SOFTWARE ON CERTAIN M318F, M320F, M322F, AND MH3022 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR RE-FLASHING THE MACHINE AND ENGINE SOFTWARE ON CERTAIN M318F, M320F, M322F, AND MH3022 WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR RE-FLASHING THE MACHINE AND ENGINE SOFTWARE ON CERTAIN M318F, M320F, M322F, MH3022, AND MH3024 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR RE-FLASHING THE MACHINE AND ENGINE SOFTWARE ON CERTAIN M318F, M320F, M322F, MH3022, AND MH3024 WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BLADE CONTROL RELIEF PRESSURE ON CERTAIN 335F LCR EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE BLADE CONTROL RELIEF PRESSURE ON CERTAIN 335F LCR EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOFTWARE AND POSSIBLY REPLACING THE ELECTRONIC UNIT FUEL INJECTORS ON CERTAIN 326/329D2 EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOFTWARE AND POSSIBLY REPLACING THE ELECTRONIC UNIT FUEL INJECTORS ON CERTAIN 326/329D2 EXCAVATORS