1998/05/04 Caterpillar


New Retaining Ring In Final Drive Motor Group Improves Reliability{5058}

Usage:


330 (9NG, 9PJ, 9WJ, 6ZK, 8RL, 2ZM),
330 L (6WJ, 6SK, 8FK, 2EL, 9ML, 5YM),
330 LN (8CK) Excavators

Description of Change: The retaining ring that secures the output shaft in the final drive motor group is improved. The new retaining ring is designed for application with shafts that have an external ring groove. The new ring improves the service life of the motor group.

Adaptable To: The new 8T-4241 Retaining Ring replaces the former 6V-5589 Ring in the 7Y-4238 Motor Group. It is adaptable to the models listed. The illustration shows the location of the new retaining ring in the motor group.


7Y-4238 Piston Motor Group.

(1) 087-4725 Shaft.
(2) 8T-4241 Retaining Ring.

Caterpillar Information System:

1998/05/04 Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/04/27 New Hardened Sleeve For Load Check Valve In Control Valve For Stick Circuit Improves Service Life {5067}
1998/04/27 New Relief Valves In Main Control Valve Improve Swing Operation {5051,5454}
1998/04/27 New Design Improves Travel Motor Regulator {4351}
1998/04/20 Oil Filter Group Changed To Allow Oil To Be Easily Drained From Oil Lines{1307}
1998/04/20 Oil Filter Group Changed To Allow Oil To Be Easily Drained From Oil Lines{1307}
1998/04/20 Additional Clip In Fuel Injection Lines Groups Helps Secure Advanced Diesel Engine Management (ADEM) I Electronic Control Module (ECM) Fuel Cooling Hose{1252}
1998/04/20 The Swing Bearing In The Bearing And Gear Group Is Improved{7063,5459}
1998/04/20 Improved Ground Engaging Tool (GET) Pin And Retainer Assembly Are Available{6805}
1998/04/20 Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/13 Improved Rod In Bottom Dump Cylinder Group For Bucket {5457}
1998/04/13 Correction To Service Manual Modules SENR6059 And SENR1371 {7601,7603}
1998/05/04 Serviceable Parts For Hydraulic Pilot System Pump{5073,5085}
1998/05/04 New Rear Glass Assembly Improves Cab Assemblies{7300,7310}
1998/05/04 New Load Sensing Signal Relief Valve Prevents Wear Between Load Piston And Housing{5117}
1998/05/04 Improved Alternator Groups Now Available{1405}
1998/05/04 ROPS Instruction Film Available Through Parts Service{7177,7405}
1998/05/11 Special Instruction, REHS0183, "Removal And Installation Of Tamperproof Caps On A RSV Governor" Is Available {1264}
1998/05/11 A New Switch Used In High Pressure Screens Of Discharge Lines From Hydraulic Pumps Is Resistant To Internal Leakage Of Hydraulic Oil {5050}
1998/05/11 Bolt Pattern Change From Six To Four In Piston And Rod For Bucket And Stick Cylinders Improves Service Life {5457,5458}
1998/05/11 New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/18 New Final Drive Parts Reduce Gear Play {4051}
1998/05/18 Entertainment Radios Improved With Increased Reliability {7338}
1998/05/25 New Main Pump Group Creates New Specifications For Service Manual Module SENR8961 {5050,0372}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.