1998/05/18 Caterpillar


New Final Drive Parts Reduce Gear Play {4051}

Usage:


214B FT (9MF),
224B (7WF) Excavators

New final drive parts are now available to service certain final drive parts for the wheel-type excavators listed above. A new internal gear replaces a gear and a carrier gear. A new piston replaces a collar. A smaller seal replaces the former seal. The replacement of the two former gears reduces the gear play which increases the stability of the machines during operation.

Chart A identifies the new and former parts for use in 214B steering and rear axle and for the 224B rear axle. All of the new parts must be replaced as a group.


See either chart for parts identification.

Chart B identifies the new and former parts for use in 214B steering and rear axle and for the 224B steering axle. All of the new parts must be replaced as a group.

Caterpillar Information System:

1998/05/11 New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11 Bolt Pattern Change From Six To Four In Piston And Rod For Bucket And Stick Cylinders Improves Service Life {5457,5458}
1998/05/11 A New Switch Used In High Pressure Screens Of Discharge Lines From Hydraulic Pumps Is Resistant To Internal Leakage Of Hydraulic Oil {5050}
1998/05/11 Special Instruction, REHS0183, "Removal And Installation Of Tamperproof Caps On A RSV Governor" Is Available {1264}
1998/05/04 ROPS Instruction Film Available Through Parts Service{7177,7405}
1998/05/04 Improved Alternator Groups Now Available{1405}
1998/05/04 New Load Sensing Signal Relief Valve Prevents Wear Between Load Piston And Housing{5117}
1998/05/04 New Rear Glass Assembly Improves Cab Assemblies{7300,7310}
1998/05/04 Serviceable Parts For Hydraulic Pilot System Pump{5073,5085}
1998/05/04 New Retaining Ring In Final Drive Motor Group Improves Reliability{5058}
1998/05/04 Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/04/27 New Hardened Sleeve For Load Check Valve In Control Valve For Stick Circuit Improves Service Life {5067}
1998/05/18 Entertainment Radios Improved With Increased Reliability {7338}
1998/05/25 New Main Pump Group Creates New Specifications For Service Manual Module SENR8961 {5050,0372}
1998/05/25 New Main Pump Group Creates New Specifications For Service Manual Module SENR8971 {5050,0372}
1998/05/25 New Ether Starting Aid Group Used {1456}
1998/05/25 New Valve Cover Seal Used {1107}
1998/06/01 Support Literature Is Now Available For Maintaining Air Conditioning And Heating Systems {7300,7304,7309,7320,7337}
1998/06/01 New Duo-Cone® Seals In Track Rollers Improves Corrosion Resistance And Low Temperature Performance {4180,7561}
1998/06/01 New Improved Alternator Guard Assembly {7168}
1998/06/01 Shims Prevent Binding Of Rotor In Swivel {5060}
1998/06/01 Installation Of Tow Hooks To Carbody {7103,7062}
1998/06/01 New Hardened Locknut Improves Retention Of Impeller On Piston Pump Shaft {5070}
1998/06/01 Information System Builder V1.2 May Experience An "Operating System Error" {7601}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.