C175-16 and C175-20 Engines for Caterpillar Built Machines Caterpillar

Assembly Procedure

Note: A CWS login is required to access Caterpillar Channel 1.

Reference: For additional information, view "C175 Centrifugal Oil Filter Clean for 797 Off-Highway Trucks" on Caterpillar Channel 1.

English

Spanish

Portuguese

Show/hide table

Illustration 1	g06317347

1. Install O-ring (22) on retainer (20).
   Show/hide table

   Illustration 2	g06317336

2. Install retainer (20) into the cover assembly.

3. Install tube (21) and install pin (19).
   Show/hide table

   Illustration 3	g06317358

4. Install clip (14) and O-ring (16) onto spindle (15).
   Show/hide table

   Illustration 4	g06318019

   Show/hide table

   Illustration 5	g06318027

5. Secure Tooling (A) in a bench vise. Place a socket on Tooling (A) to hold the rotor assembly.

6. Place spindle (15) and rotor base on Tooling (A).

7. Install plate (13), O-ring (12), and rotor tube (11).
   Show/hide table

   Illustration 6	g06317287

8. Install the paper liner (10) from rotor tube (11).
   Show/hide table

   Illustration 7	g06317282

9. Install O-ring (9) and clip (8).

10. Install cover (7) and tighten nut (6) to a torque of 40 ± 6 N·m (29.5 ± 4.5 lb ft).
    Show/hide table

    Illustration 8	g06289059

11. Install rotor assembly (5) onto the filter base.
    Show/hide table

    Illustration 9	g06289052

12. Install O-ring seal (4) onto the filter base.
    Show/hide table

    Illustration 10	g06289047

13. Loosen clamp (3) and nut (1). Remove cover (2) from the filter base.

14. Install cover assembly (2) and hand tighten nut (1).

15. Install clamp (3). Tighten clamp (3) to a torque of 20 ± 2 N·m (177 ± 18 lb in)

16. Tighten nut (1) to a torque of 15 ± 2 N·m (133 ± 18 lb in)

End By:

1. Install the centrifugal oil filter. Refer to Disassembly and Assembly, "Centrifugal Oil Filter - Remove and Install".