Pump Drive - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Show/hide table
Required Tools | |||
Tools | Part Number | Part Description | Qty |
A | 439-3940 | Bracket As | 1 |
Start By:
- Remove hoist and rear brake cooling gear pump.
- Remove brake cooling gear pump.
- Remove steering piston pump.
Show/hide table
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area. |
- Refer to Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
- Refer to Operation and Maintenance Manual, "System Pressure Release".
Show/hide table
Illustration 1 | g06289963 |
Show/hide table
Illustration 2 | g06289977 |
Show/hide table
Illustration 3 | g06290031 |
Install the pump drive in the reverse order of removal.
Caterpillar Information System:
785G Off-Highway Truck Machines Systems Pump Drive Shaft - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Centrifugal Oil Filter - Disassemble
A New Hydraulic Tank Site Glass Identification Plate is Now Used on Certain 785D Off-Highway Trucks {4332, 5056} A New Hydraulic Tank Site Glass Identification Plate is Now Used on Certain 785D Off-Highway Trucks {4332, 5056}
785G Off-Highway Truck Machines Systems Drive Shaft Guard - Remove and Install
New Turbochargers Are Used on Certain C175 High Altitude Off-Highway Truck Engines {1052} New Turbochargers Are Used on Certain C175 High Altitude Off-Highway Truck Engines {1052}
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Rear Axle Oil Filter - Replace - Drive Motor
MD6200 Rotary Drill ARD Spark Plug - Clean - Emission Related Component
24 Motor Grader Machine Systems Hydraulic Tank and Filter - Remove and Install
24 Motor Grader Machine Systems Piston Pump (Implement) - Assemble
24 Motor Grader Machine Systems Piston Pump (Implement) - Disassemble
Check Lockup Clutch Function on Certain R2900G Load haul Dump Machines {4050} Check Lockup Clutch Function on Certain R2900G Load haul Dump Machines {4050}
794 AC Off-Highway Truck Field Assembly Front Axle - Install - Chassis
986K Wheel Loader Machine Systems Cab - Remove and Install
24 Motor Grader Power Train Transfer Gears - Assemble - Input
Certain Cat® Product Link (PLE742) Devices May Not Report in VisionLink {7606} Certain Cat® Product Link (PLE742) Devices May Not Report in VisionLink {7606}
785G Off-Highway Truck Machines Systems Gear Pump (Brake Cooling) - Remove and Install
559D and 579D Knuckleboom Loader Machine Systems Hydraulic Tank - Remove and Install
24 Motor Grader Power Train Torque Converter - Assemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Centrifugal Oil Filter - Assemble
24 Motor Graders Engine Supplement Muffler - Remove and Install
797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160} 797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160}
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C5 Radar - If Equipped
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Isolation Mounts - Inspect/Replace - Primary ECM
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553} Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}