Pump Drive Shaft - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Start By:
- Remove the drive shaft guard.
Show/hide table
 |
|
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area. |
- Refer to Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
Show/hide table
| |
| Illustration 1 | g06289131 |
Show/hide table
| |
| Illustration 2 | g06289148 |
Install the drive shaft in the reverse order of removal.
Show/hide table
| |
| Illustration 3 | g06289158 |
Show/hide table
| |
| Illustration 4 | g06289169 |
Caterpillar Information System:
C175-16 and C175-20 Engines for Caterpillar Built Machines Centrifugal Oil Filter - Disassemble
A New Hydraulic Tank Site Glass Identification Plate is Now Used on Certain 785D Off-Highway Trucks {4332, 5056} A New Hydraulic Tank Site Glass Identification Plate is Now Used on Certain 785D Off-Highway Trucks {4332, 5056}
785G Off-Highway Truck Machines Systems Drive Shaft Guard - Remove and Install
New Turbochargers Are Used on Certain C175 High Altitude Off-Highway Truck Engines {1052} New Turbochargers Are Used on Certain C175 High Altitude Off-Highway Truck Engines {1052}
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Rear Axle Oil Filter - Replace - Drive Motor
MD6200 Rotary Drill ARD Spark Plug - Clean - Emission Related Component
24 Motor Grader Machine Systems Hydraulic Tank and Filter - Remove and Install
24 Motor Grader Machine Systems Piston Pump (Implement) - Assemble
24 Motor Grader Machine Systems Piston Pump (Implement) - Disassemble
Check Lockup Clutch Function on Certain R2900G Load haul Dump Machines {4050} Check Lockup Clutch Function on Certain R2900G Load haul Dump Machines {4050}
794 AC Off-Highway Truck Field Assembly Front Axle - Install - Chassis
MD6200 Rotary Drill Diesel Exhaust Fluid - Fill - Emission Related Component
785G Off-Highway Truck Machines Systems Pump Drive - Remove and Install
986K Wheel Loader Machine Systems Cab - Remove and Install
24 Motor Grader Power Train Transfer Gears - Assemble - Input
Certain Cat® Product Link (PLE742) Devices May Not Report in VisionLink {7606} Certain Cat® Product Link (PLE742) Devices May Not Report in VisionLink {7606}
785G Off-Highway Truck Machines Systems Gear Pump (Brake Cooling) - Remove and Install
559D and 579D Knuckleboom Loader Machine Systems Hydraulic Tank - Remove and Install
24 Motor Grader Power Train Torque Converter - Assemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Centrifugal Oil Filter - Assemble
24 Motor Graders Engine Supplement Muffler - Remove and Install
797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160} 797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160}
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C5 Radar - If Equipped
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Isolation Mounts - Inspect/Replace - Primary ECM