Screed Control - Assemble
- Install horn assembly (19) and the nut to the front half of screed control (1).
- Install rocker switch (18), the two washers, and the two bolts to the front half of screed control (1).
- Install key pad modules (17) (not shown), the six nuts, and the six washers to the front half of screed control (1).
- Install stop switch (16) to the front half of screed control (1).
Show/hide table
Illustration 2 g06265676 - Connect harness assembly (15) and install the four bolts, the eight washers, and the four nuts to the back half of screed control (1).
- Connect harness assembly (14) to the back half of screed control (1).
Show/hide table
Illustration 3 g03698621 - Connect harness assembly (11), harness assembly (12), and harness assembly (13).
Show/hide table
Illustration 4 g03698619 - Connect harness assemblies (9) and (10).
Show/hide table
Illustration 5 g06265668 - Connect harness assemblies (6), harness assembly (7), and harness assembly (8).
Show/hide table
Illustration 6 g06265665 - Connect the two halves of screed control (1).
- Install 13 bolts (5) and the 13 washers to screed control (1).
Show/hide table
Illustration 7 g03698615 - Connect harness assemblies (4) to control group (2).
Show/hide table
Illustration 8 g06265658 Show/hide tableIllustration 9 g06265657 - Install control group (2) to screed control (1).
- Install four bolts (3) and the four washers. Tighten four bolts (3) to a torque of
6 N·m (53 lb in) .
Show/hide table
Illustration 1 | g06265728 |
End By:
- Install the screed control.
Caterpillar Information System:
Updated Machine System and Grade Control Software and A New Water Spray Valve Group Are Now Used on Certain PM620 and PM622 Cold Planers {5051} Updated Machine System and Grade Control Software and A New Water Spray Valve Group Are Now Used on Certain PM620 and PM622 Cold Planers {5051}
PM820, PM822, and PM825 Cold Planer Engine Supplement Fumes Disposal Filter - Remove and Install
986K Wheel Loader Machine Systems Hydraulic Tank - Assemble
A New Drive Motor Bearing Kit Is Available for Certain Skid Steer Loaders {4351, 5058} A New Drive Motor Bearing Kit Is Available for Certain Skid Steer Loaders {4351, 5058}
785G Off-Highway Truck Machines Systems Lubrication Pump (Automatic) - Remove and Install
New Software Is Now Used on Certain C-Series Telehandlers {7610, 7620} New Software Is Now Used on Certain C-Series Telehandlers {7610, 7620}
PM820, PM822, and PM825 Cold Planer Engine Supplement Fuel Filter Base (Secondary) - Remove and Install
SE50 VT Asphalt Screed Screed Control - Disassemble
SE50 VT Asphalt Screed Platform - Remove and Install
SE50 VT Asphalt Screed Screed Control - Remove and Install
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Product Identification
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Declaration of Conformity
New Wiring Harness for Screed Control Pendant Is Now Used on Certain Asphalt Screeds {5639, 7451} New Wiring Harness for Screed Control Pendant Is Now Used on Certain Asphalt Screeds {5639, 7451}
New Tow Arms are Now Used On Certain Asphalt Pavers {7121} New Tow Arms are Now Used On Certain Asphalt Pavers {7121}
New LADAR Harness Assembly now Available for Certain R1600G Load Haul Dump Machines {1408, 1439} New LADAR Harness Assembly now Available for Certain R1600G Load Haul Dump Machines {1408, 1439}
Tope May Stop Responding During Camera Switching on Color Multi-Purpose Display (CMPD) {7605} Tope May Stop Responding During Camera Switching on Color Multi-Purpose Display (CMPD) {7605}
986K Wheel Loader Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Pump (Hydraulic Fan) - Remove and Install
986K Wheel Loader Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
Sealant is Now Used for Alternator and Auxillary Drive Pulleys on Certain Cat® Machine Engines {1154, 1207, 1358, 1405, 1425} Sealant is Now Used for Alternator and Auxillary Drive Pulleys on Certain Cat® Machine Engines {1154, 1207, 1358, 1405, 1425}
SE50 VT Asphalt Screed Screed Plate (Main) - Remove and Install
® for Dozing, Gen 3.5 Remote Control Operator Console for D8T Track Type Tractor System Operation
986K Wheel Loader Machine Systems Steering Neutralizer Valve - Remove and Install
CW12 Pneumatic Compactor Propel Systems General Information (Propel System)