Declaration of Conformity
Show/hide table
| EU Declaration of Conformity | |
| EC Directive(s) | 2014/53/EU |
| Manufacturer | Autoliv ASP, Inc. |
| 26545 American Drive | |
| Southfield, Michigan 48034 | |
| United States of America | |
| Radio Equipment | 6208428 |
| Description / Intended Use | Short Range Device - 24 GHz Automotive Radar |
| Article 3.2: Applied Radio Spectrum Standard(s) | EN 302 288: V2.1.1 (2017–05); EN 303 396 V1.1.1 (2016–12); Test Report No. 10418–17 V1 |
| Article 3.1(b): Applied EMC Standard(s) | EN 301 489-1/-3; Test Report No. 17–1–0029401T02a |
| Article 3.1(a) Applied Health and Safety Standard(s) | EN 62368–1; VDE Folder nr: 5022978–3250–0001, Test Report No. 17–1–0029401T04a |
| Frequency band(s) in which the radio equipment operates | 21.650 - 26.650 GHz |
| Maximum radio frequency power transmitted | Max. 20dBm (24.05 - 24.25 GHz) - 41.3 dBm/MHz (24.25 - 26.65 GHz) |
| Herby, Autoliv ASP, Inc. declares that the object of the declaration described above is in conformity with the relevant Union harmonization legislation (Directive 23014/53/EU) | |
| This declaration is issued under the sold responsibility of the manufacturer. | |
Show/hide table
| |
| Illustration 1 | g06227196 |
Caterpillar Information System:
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Host Machine Pressure and Flow - Test
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Swivel Leakage - Test
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Gerotor Motor Leakage - Test
Rework Procedure for Driver Safety System (DSS) Vibration Motor Bracket is Now Available {7348, 7960} Rework Procedure for Driver Safety System (DSS) Vibration Motor Bracket is Now Available {7348, 7960}
2D GRADE System for 24 Next Gen Motor Graders Connector Contact Description
2D GRADE System for 24 Next Gen Motor Graders Module - Replace
2D GRADE System for 24 Next Gen Motor Graders Module - Flash Program
2D GRADE System for 24 Next Gen Motor Graders Electrical Connector - Inspect
2D GRADE System for 24 Next Gen Motor Graders Calibration
2D GRADE System for 24 Next Gen Motor Graders Machine Measurements and Alignment
2D GRADE System for 24 Next Gen Motor Graders Wiring Harness (Short Circuit) - Test
2D GRADE System for 24 Next Gen Motor Graders Wiring Harness (Open Circuit) - Test
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Product Identification
SE50 VT Asphalt Screed Screed Control - Remove and Install
SE50 VT Asphalt Screed Platform - Remove and Install
SE50 VT Asphalt Screed Screed Control - Disassemble
PM820, PM822, and PM825 Cold Planer Engine Supplement Fuel Filter Base (Secondary) - Remove and Install
New Software Is Now Used on Certain C-Series Telehandlers {7610, 7620} New Software Is Now Used on Certain C-Series Telehandlers {7610, 7620}
785G Off-Highway Truck Machines Systems Lubrication Pump (Automatic) - Remove and Install
A New Drive Motor Bearing Kit Is Available for Certain Skid Steer Loaders {4351, 5058} A New Drive Motor Bearing Kit Is Available for Certain Skid Steer Loaders {4351, 5058}
986K Wheel Loader Machine Systems Hydraulic Tank - Assemble
PM820, PM822, and PM825 Cold Planer Engine Supplement Fumes Disposal Filter - Remove and Install
Updated Machine System and Grade Control Software and A New Water Spray Valve Group Are Now Used on Certain PM620 and PM622 Cold Planers {5051} Updated Machine System and Grade Control Software and A New Water Spray Valve Group Are Now Used on Certain PM620 and PM622 Cold Planers {5051}
SE50 VT Asphalt Screed Screed Control - Assemble