Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin. Be sure that the engine and components are cool enough to touch with your bare hand prior to performing any service work. |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Open door (1).
Show/hide table
Illustration 2 g06266538 - Open door (2).
Show/hide table
Illustration 3 g06266539 - Use Tooling (A) to remove engine oil filter (3). Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct draining and removal procedure.
Show/hide table
Illustration 4 g06266540 - Disconnect and reposition hose assemblies (4) and (5).
Show/hide table
Illustration 5 g06266572 - Remove bolts (6) and engine oil filter base (7).
Illustration 1 | g06266537 |
- Install the engine oil filter base and the engine oil filter in the reverse order of removal.
- Before installation of engine oil filter (3), lubricate all exposed sealing surfaces of engine oil filter (3) with clean engine oil.
- Tighten engine oil filter (3) to a torque of
100 ± 5 N·m (74 ± 4 lb ft) .Note: Make sure to maintain no gap exists between engine oil filter (3) and engine oil filter base (7) when assembled into the filter group.