Housing (Front)
Show/hide table
Illustration 1 | g00412238 |
Typical example |
(1) Speed timing sensor control group. Lubricate the threads with engine oil prior to installation. Tighten the bolts to the following torque. ... 25 ± 5 N·m (18 ± 4 lb ft)
(2) Tighten the studs to the following torque. ... 65 ± 10 N·m (50 ± 7 lb ft)
For the installation of the timing sensor, use the following procedure:
- Pull out the sliphead on the timing sensor.
- Install the timing sensor into the front timing gear housing.
- Remove the timing sensor.
- Add the washer to the timing sensor.
- Reinstall the timing sensor. Tighten the timing sensor to the torque listed above.
Show/hide table
Illustration 2 | g00412243 |
Typical example of View A-A, B-B, and C-C |
(3) Apply Loctite 271 to all stud serrations prior to installation.
Caterpillar Information System:
3406E Truck Engine Gear Group (Front)
3406E and 3456 Industrial Engines Fuel Filter Base
3500B Locomotive Engines Monitoring System
C-10 and C-12 Truck Engines Flywheel
3176C and 3196 Industrial Engines Flywheel
3500B Locomotive Engines Refill Capacities
C175-16 Locomotive Engines Engine Rating Definitions
3406E and 3456 Industrial Engines Alternator Mounting
3176C and 3196 Industrial Engines Engine Support (Front)
3176C and 3196 Engines for Caterpillar Built Machines Gear Group (Front)
3512C HD Locomotive Engine Manual Stop Procedure
3176C and 3196 Engines for Caterpillar Built Machines Housing (Front)
CPT372 Truck Mounted Pumper Fuel Related Components in Cold Weather
3406E and 3456 Industrial Engines Accessory Drive
Electronic Modular Control Panel II+ (EMCP II+) Sensors
3500 and 3500B Engines Alarms and Shutoffs
3054E and 3056E Industrial Engines Electronics Grounding Stud - Inspect/Clean/Tighten
Electronic Modular Control Panel II+ (EMCP II+) Instrument Panel - For 3508, 3512, and 3516 MUI Engines (Including Paralleling) and 3412C PEEC Engines With Paralleling
3408E and 3412E Industrial Engines Fuel System - Prime
3408E and 3412E Industrial Engines Fuel System Secondary Filter - Replace
3406E and 3456 Industrial Engines Engine Support (Rear)
3500B Locomotive Engines Instrument Panel - Inspect
C175-16 Locomotive Engine Reference Material
3500B Locomotive Engines Engine Oil and Filter - Change