Alternator Mounting
Show/hide table
 | |
| Illustration 1 | g00393648 |
Typical example | |
(1) Apply 9S-3263 Thread Lock Compound to the studs. Tighten the nuts to the following torque. ... 70 ± 5 N·m (52 ± 4 lb ft)
(2) Tighten the nuts to the following torque. ... 30 ± 15 N·m (22 ± 11 lb ft)
Caterpillar Information System:
3176C and 3196 Industrial Engines Engine Support (Front)
3176C and 3196 Engines for Caterpillar Built Machines Gear Group (Front)
3512C HD Locomotive Engine Manual Stop Procedure
3176C and 3196 Engines for Caterpillar Built Machines Housing (Front)
3406E and 3456 Industrial Engines Jacket Water Heater
3176C and 3196 Industrial Engines Piston and Rings
3500B Locomotive Engines Emergency Stopping
C175-16 Locomotive Engine Fuel Conservation Practices
3176C Engine Piston and Rings
C175-16 Locomotive Engines After Starting Engine
Electronic Modular Control Panel II+ (EMCP II+) Component Location - For 3412C, 3508, 3512, and 3516 MUI Engines (Including Paralleling) and 3412C Engines With Paralleling
3176C and 3196 Industrial Engines Connecting Rod
C175-16 Locomotive Engines Engine Rating Definitions
3500B Locomotive Engines Refill Capacities
3176C and 3196 Industrial Engines Flywheel
C-10 and C-12 Truck Engines Flywheel
3500B Locomotive Engines Monitoring System
3406E and 3456 Industrial Engines Fuel Filter Base
3406E Truck Engine Gear Group (Front)
3406E and 3456 Industrial Engines Housing (Front)
CPT372 Truck Mounted Pumper Fuel Related Components in Cold Weather
3406E and 3456 Industrial Engines Accessory Drive
Electronic Modular Control Panel II+ (EMCP II+) Sensors
3500 and 3500B Engines Alarms and Shutoffs