Manual Stop Procedure
Show/hide table
| 注意 |
|---|
发动机带负荷运行后立即停机会引起过热并加快发动机零部件的磨损。 在发动机停机以前，让发动机逐渐冷却下来。 |
注: 发动机降温的转速和持续时间可以利用电子维修工具进行编程。
正常的停机步骤请参看机车OEM提供的"操作员手册"。
正常停机按钮位于与发动机一起装运的接线箱上。 附加的停机控制装置是由机车OEM负责的。
Show/hide table
 | |
| 图 1 | g00393198 |
在接线箱上的停机按钮(正常停机) | |
在发动机正常运转时的紧急停机按钮是处在伸出(OUT)位置。 要发动机停机时,推动按钮。 这就会停止燃油喷油。
发动机将逐渐停下来。 在发动机停机之后，确保为发动机运行提供外部支持的所有系统是安全可靠的。
当曲轴转动时，如果将停机按钮回位，发动机会恢复正常工作。
必须使停机按钮回位,然后发动机才可以起动。 瞬时针旋转该按钮，将其复位。 弹簧加载的按钮会回到伸出(OUT)位置。 该按钮也可能会被拉出到伸出(OUT)位置。
Caterpillar Information System:
3176C and 3196 Engines for Caterpillar Built Machines Housing (Front)
3406E and 3456 Industrial Engines Jacket Water Heater
3176C and 3196 Industrial Engines Piston and Rings
3500B Locomotive Engines Emergency Stopping
C175-16 Locomotive Engine Fuel Conservation Practices
3176C Engine Piston and Rings
C175-16 Locomotive Engines After Starting Engine
Electronic Modular Control Panel II+ (EMCP II+) Component Location - For 3412C, 3508, 3512, and 3516 MUI Engines (Including Paralleling) and 3412C Engines With Paralleling
3176C and 3196 Industrial Engines Connecting Rod
3176C and 3196 Industrial Engines Connecting Rod Bearing Journal
3176C Engine Connecting Rod Bearing Journal
3408E and 3412E Industrial Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
3176C and 3196 Engines for Caterpillar Built Machines Gear Group (Front)
3176C and 3196 Industrial Engines Engine Support (Front)
3406E and 3456 Industrial Engines Alternator Mounting
C175-16 Locomotive Engines Engine Rating Definitions
3500B Locomotive Engines Refill Capacities
3176C and 3196 Industrial Engines Flywheel
C-10 and C-12 Truck Engines Flywheel
3500B Locomotive Engines Monitoring System
3406E and 3456 Industrial Engines Fuel Filter Base
3406E Truck Engine Gear Group (Front)
3406E and 3456 Industrial Engines Housing (Front)
CPT372 Truck Mounted Pumper Fuel Related Components in Cold Weather