3176C Engine Caterpillar


Connecting Rod Bearing Journal

Usage:

CPT372 1WZ

Table 1
Connecting Rod Bearing Journal 
Original size journal  82.000 ± 0.020 mm (3.2283 ± .0008 inch) 
Undersize journal
0.508 mm (.0200 inch) 
81.492 ± 0.020 mm (3.2083 ± .0008 inch) 
Undersize journal
0.762 mm (.0300 inch) 
81.238 ± 0.020 mm (3.1983 ± .0008 inch) 

The clearance between a new bearing and a new journal is the following value. ... 0.046 to 0.116 mm (.0018 to .0046 inch)

Caterpillar Information System:

3408E and 3412E Industrial Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
3176C and 3196 Engines for Caterpillar Built Machines Main Bearing Journal
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Liner Projection
3034 Engine for Caterpillar Built Machines Electrical System
3500B Locomotive Engines Electric Starting Motor
3406E and 3456 Industrial Engines Air Starting Motor Pressure Regulating Valve
3408C and 3412C Marine Engines Air Starting Motor
3034 Engine for Caterpillar Built Machines Cooling System
3176C and 3196 Industrial Engines Cylinder Block
3034 Engine for Caterpillar Built Machines Lubrication System
3406E and 3456 Industrial Engines Electric Starting Motor
3176C and 3196 Industrial Engines Coolant Conditioner Base
3176C and 3196 Industrial Engines Connecting Rod Bearing Journal
3176C and 3196 Industrial Engines Connecting Rod
Electronic Modular Control Panel II+ (EMCP II+) Component Location - For 3412C, 3508, 3512, and 3516 MUI Engines (Including Paralleling) and 3412C Engines With Paralleling
C175-16 Locomotive Engines After Starting Engine
3176C Engine Piston and Rings
C175-16 Locomotive Engine Fuel Conservation Practices
3500B Locomotive Engines Emergency Stopping
3176C and 3196 Industrial Engines Piston and Rings
3406E and 3456 Industrial Engines Jacket Water Heater
3176C and 3196 Engines for Caterpillar Built Machines Housing (Front)
3512C HD Locomotive Engine Manual Stop Procedure
3176C and 3196 Engines for Caterpillar Built Machines Gear Group (Front)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.