Flywheel
Show/hide table
图 1 | g01416788 |
(2) 飞轮 |
参考测试和调整, "基本结构"主题以了解检查飞轮跳动的正确步骤。
(1) 飞轮齿圈
- 飞轮齿圈组装时必须紧靠飞轮凸肩 (4) 。 安装齿圈时的最高温度 ... 315 °C (599 °F)
(3) 螺栓
-
将 7M-7456 固定胶 涂抹在螺栓的螺纹上。
- 将螺栓再次拧紧至以下扭矩。 ... 300 ± 40 N·m (220 ± 30 lb ft)
Caterpillar Information System:
3500B Locomotive Engines Refill Capacities
C175-16 Locomotive Engines Engine Rating Definitions
3406E and 3456 Industrial Engines Alternator Mounting
3176C and 3196 Industrial Engines Engine Support (Front)
3176C and 3196 Engines for Caterpillar Built Machines Gear Group (Front)
3512C HD Locomotive Engine Manual Stop Procedure
3176C and 3196 Engines for Caterpillar Built Machines Housing (Front)
3406E and 3456 Industrial Engines Jacket Water Heater
3176C and 3196 Industrial Engines Piston and Rings
3500B Locomotive Engines Emergency Stopping
C175-16 Locomotive Engine Fuel Conservation Practices
3176C Engine Piston and Rings
C-10 and C-12 Truck Engines Flywheel
3500B Locomotive Engines Monitoring System
3406E and 3456 Industrial Engines Fuel Filter Base
3406E Truck Engine Gear Group (Front)
3406E and 3456 Industrial Engines Housing (Front)
CPT372 Truck Mounted Pumper Fuel Related Components in Cold Weather
3406E and 3456 Industrial Engines Accessory Drive
Electronic Modular Control Panel II+ (EMCP II+) Sensors
3500 and 3500B Engines Alarms and Shutoffs
3054E and 3056E Industrial Engines Electronics Grounding Stud - Inspect/Clean/Tighten
Electronic Modular Control Panel II+ (EMCP II+) Instrument Panel - For 3508, 3512, and 3516 MUI Engines (Including Paralleling) and 3412C PEEC Engines With Paralleling
3408E and 3412E Industrial Engines Fuel System - Prime