Accessory Drive
Show/hide table
 | |
| Illustration 1 | g00288837 |
(1) Tighten the air compressor shaft nut to the following torque. ... 460 ± 60 N·m (340 ± 44 lb ft)
Caterpillar Information System:
CPT372 Truck Mounted Pumper Fuel Related Components in Cold Weather
3406E and 3456 Industrial Engines Housing (Front)
3406E Truck Engine Gear Group (Front)
3406E and 3456 Industrial Engines Fuel Filter Base
3500B Locomotive Engines Monitoring System
C-10 and C-12 Truck Engines Flywheel
3176C and 3196 Industrial Engines Flywheel
3500B Locomotive Engines Refill Capacities
C175-16 Locomotive Engines Engine Rating Definitions
3406E and 3456 Industrial Engines Alternator Mounting
3176C and 3196 Industrial Engines Engine Support (Front)
3176C and 3196 Engines for Caterpillar Built Machines Gear Group (Front)
Electronic Modular Control Panel II+ (EMCP II+) Sensors
3500 and 3500B Engines Alarms and Shutoffs
3054E and 3056E Industrial Engines Electronics Grounding Stud - Inspect/Clean/Tighten
Electronic Modular Control Panel II+ (EMCP II+) Instrument Panel - For 3508, 3512, and 3516 MUI Engines (Including Paralleling) and 3412C PEEC Engines With Paralleling
3408E and 3412E Industrial Engines Fuel System - Prime
3408E and 3412E Industrial Engines Fuel System Secondary Filter - Replace
3406E and 3456 Industrial Engines Engine Support (Rear)
3500B Locomotive Engines Instrument Panel - Inspect
C175-16 Locomotive Engine Reference Material
3500B Locomotive Engines Engine Oil and Filter - Change
3500B Locomotive Engines Cooling System Coolant Level - Check
Electronic Modular Control Panel II+ (EMCP II+) Modes Of Operation