Machine > Parameters
| |
| Illustration 1 | g06218310 |
| (1) Machine button | |
Press the Machine button (1) to view the Machine Parameters menu page.
| |
| Illustration 2 | g06220009 |
| (2) Parameters menu button | |
| |
| Illustration 3 | g06220015 |
|
(3) Non-Interactive Scroll bar with sliding indicator
(4) UP Arrow button (5) OK button (6) DOWN Arrow button (7) BACK button (8) HOME button (9) Parameters menu button group | |
- Press the Parameters menu button (2). The button will turn first to blue, then to yellow. The Parameters menu page will appear.
- Use the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the list of menu items. The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move with each selection.
- Press the intended menu button. The button will turn first to blue, then to yellow.
- The following list of Parameter menu buttons will appear:
- Engine
- Transmission
- Implement
- Steering
- Brake/Axle
- Cab
- Payload (The Payload feature is installed)
- Tire Monitor
- Autolube
- Press the BACK button (7) to return to the previous menu.
- Press the Home button (8) to return to the Home page.
Note: The navigation procedure for Engine Parameters is the same as all the parameters.
Machine > Parameters > Engine
| |
| Illustration 4 | g06220043 |
| (10) Engine menu button | |
| |
| Illustration 5 | g06220046 |
|
A view of an Engine Parameters page. Parameter listings may vary, depending on the machine model and equipped features. (3) Non-Interactive Scroll bar with sliding indicator (4) UP Arrow button (6) DOWN Arrow button (7) BACK button (8) HOME button | |
- Press the Machine button (1) that is located on the right side of the Information Display. The Machine menu page will appear.
- Press the Parameters menu button (2). The button will turn first to blue, then turn to yellow. The Parameters menu page will appear.
- Press the Engine menu button (10). The button will turn first to blue, then to yellow. The Engine Parameters page will appear.
- Scroll through the list of Parameters by using the UP Arrow button (4) or the DOWN Arrow button (6). The Menu Sliding indicator of the Non-Interactive Scroll Bar (3) will move accordingly.
- Press the BACK button (7) to return to the previous menu.
- Press the Home button (8) to return to the Home page.
Machine > Parameters > Tire Monitor
Note: The Tire Pressure Monitoring System must be installed.
| |
| Illustration 6 | g06228603 |
|
(3) Non-Interactive Scroll bar with sliding indicator
(4) UP Arrow button (5) OK button (6) DOWN Arrow button (7) BACK button (8) HOME button (11) Tire Monitor menu button | |
The Tire Monitor will keep the operator aware of the status of the pressure and temperature of the machine’s tires.
- Press the Tire Monitor menu button (11). The menu button will turn blue, then turn yellow. The Tire Monitor data page will appear.
| |
| Illustration 7 | g06228629 |
|
Tire Monitor data page (12) Tire Monitor (13) Target Pressure Front Axle/Rear Axle data | |
The Target Pressure data (13) will keep the operator aware of what the target pressure of the tires per axle (Front Axle – Top) (Rear Axle – Bottom).
The Tire Monitor (12) will keep the operator aware of the status of the pressure and temperature of each tire.
| |
| Illustration 8 | g06228641 |
|
(7) BACK button
(8) HOME button (12) Tire Monitor (14) Temperature/Pressure toggle button | |
- Pressing the Temperature/Pressure toggle button (14) will allow the operator to toggle between viewing the pressure or the temperature shown by the Tire Monitor (12).
| |
| Illustration 9 | g06228656 |
| (14) Temperature/Pressure toggle button | |
The tire pressure will be displayed as either “psi” (English unit – Pounds per Inch) or as “kPa” (Metric unit – Kilopascal).
Note: The measuring units (English and Metric) can be changed on the Information Display. For more information, refer to the following section in this manual:
- Display > Units
| |
| Illustration 10 | g06228665 |
|
The tire pressure will be displayed as either “ºF” (English unit: Degrees - Fahrenheit) or as “ºC” (Metric unit: Degrees - Celsius). (14) Temperature/Pressure toggle button | |
Note: The measuring units (English and Metric) can be changed on the Information Display. For more information, refer to the following section in this manual:
- Display > Units
Temperature/Pressure Sensor Indicators
| |
| Illustration 11 | g06228672 |
|
(15) Left Rear Tire
(16) Left Front Tire (17) Right Front Tire (18) Right Rear Tire | |
The Tire Monitor has four Temperature/Pressure Sensor Indicators, one sensor for each tire:
- Left Rear Tire (15)
- Left Front Tire (16)
- Right Front Tire (17)
- Right Rear Tire (18)
| |
| Illustration 12 | g06228684 |
|
( 14) Temperature/Pressure toggle button
(15) Left Rear Tire (17) Right Front Tire | |
The operator is notified of a warning when the reading of each tire is surrounded by warning frame.
An arrow inside the warning frame will indicate that the pressure of that tire is either high (upward pointing arrow) or low (downward pointing arrow). The accompanying tire will also light up.
There are two types of warnings:
- Level 1 Warning (Yellow)
- Level 2 Warning (Red)
In the image above, the Left Rear Tire (15) is showing a Low Pressure Warning (Level 1 – Yellow). The Right Front Tire (17) is showing a Low Pressure Warning (Level 2 – Red). The Tire Monitor is reading the tire pressure as indicated by the “psi” reading.
| |
| Illustration 13 | g06228720 |
|
Tire Monitor Warning Chart | |