C13 Engines for Caterpillar Built Machines Caterpillar


Engine Shutdown While Idling

Usage:

730C2 2L7
Use this procedure if one of the following event codes is active. Refer to Troubleshooting, "Event Codes" for information about event codes.

Note: Some of the following codes may not be applicable for certain applications.

Table 1
Diagnostic Trouble Codes 
CDL Code  Description  Comments 
E1171 (1)  Engine Idle Shutdown Occurred  The engine has been idling for an extended amount of time.
This notification is for the operator. This notification is not a suspected engine problem.
The code is logged. 
E1172 (2)  Engine Idle Shutdown Pending  The engine is preparing to shut down because of an extended "non-working" idle time.
The code is logged. 
E1172 (3)  Engine Idle Shutdown Pending  The engine is shutting down.
An alarm is activated.
The code is logged. 
E1217 (3)  Delayed Engine Shutdown Override  The "Delayed Engine Shutdown" has been overridden.
The engine will shut down, no troubleshooting required. 

Probable Causes

  • Extended idle time

Recommended Actions

Table 2
Troubleshooting Test Steps  Values  Results 

1. Engine At Idle Speed

A. This condition is normal operation. The engine has been idling for an extended amount of time and the Electronic Control Module (ECM) will shut down the engine.

B. The "Engine Idle Shutdown Enable Status" parameter in Cat® Electronic Technician (ET) can be disabled. The amount of time before engine shutdown can then be configured.
 

Normal Operation
 

Result: This condition is normal operation.

Return the unit to service.
 

If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).

Caterpillar Information System:

2570D and 2670D Wheel Feller Buncher Power Train Tire and Rim (Front) - Remove and Install
C13 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Piston Pump - Assemble - Main Hydraulic
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Piston Pump - Disassemble - Main Hydraulic
C13 Engines for Caterpillar Built Machines Crankcase Pressure Is High
994K Wheel Loader Machine Systems Hydraulic Tank - Remove and Install - Steering and Brake
994K Wheel Loader Machine Systems Hydraulic Tank - Remove and Install - Implement
2570D and 2670D Wheel Feller Buncher Power Train Drive Shaft (Rear) - Remove and Install
Procedure to Install Improved Front Engine Mount Assemblies on Certain 773G and 775G Off-Highway Trucks {1152, 1153, 1154} Procedure to Install Improved Front Engine Mount Assemblies on Certain 773G and 775G Off-Highway Trucks {1152, 1153, 1154}
Improved Power Train Software is now Used on Certain Articulated Trucks {1901, 7490, 7610, 7620} Improved Power Train Software is now Used on Certain Articulated Trucks {1901, 7490, 7610, 7620}
Installation of the 504-5707 Self-Cleaning Oil Filter and Centrifugal Oil Filter Kit On Certain C175 Off-Highway Truck Engines {1306, 1308, 1328} Installation of the 504-5707 Self-Cleaning Oil Filter and Centrifugal Oil Filter Kit On Certain C175 Off-Highway Truck Engines {1306, 1308, 1328}
Improved Process for Conditioner Gp Heater Hose Clamp on Certain K-Series Large Wheel Loader, Wheeled Dozer, Soil Compactor, and Landfill Compactor Machines {1380, 1808, 1812, 7304} Improved Process for Conditioner Gp Heater Hose Clamp on Certain K-Series Large Wheel Loader, Wheeled Dozer, Soil Compactor, and Landfill Compactor Machines {1380, 1808, 1812, 7304}
The Welds on the Lower Fuel Tank Support Are Improved on the 797F Off-Highway Trucks {0679, 1273, 7050, 7051} The Welds on the Lower Fuel Tank Support Are Improved on the 797F Off-Highway Trucks {0679, 1273, 7050, 7051}
CS44B Vibratory Soil Compactor Propel Systems Visual Inspection
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Cat ET List Management
CS44B Vibratory Soil Compactor Propel Systems Propel System Troubleshooting
CS44B Vibratory Soil Compactor Machine Systems Machine Preparation for Troubleshooting
CS44B Vibratory Soil Compactor Machine Systems Visual Inspection
CS44B Vibratory Soil Compactor Machine Systems Vibratory System Troubleshooting
CS44B Vibratory Soil Compactor Machine Systems Steering System Troubleshooting
CS44B Vibratory Soil Compactor Machine Systems Leveling Blade System Troubleshooting
745 & 740 GC Articulated Truck Hoist Control Valve
745 & 740 GC Articulated Truck Hydraulic Tank
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Oil Accumulator - Test and Charge
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.