2570D and 2670D Wheel Feller Buncher Power Train Caterpillar

Removal Procedure

Start By:

1. Connect steering frame lock.

Show/hide table

Illustration 1	g00992783

1. Use Tooling (A) to raise the machine.
   Show/hide table

   Illustration 2	g00992784

2. Attach a suitable lifting device to tire and rim (1). The weight of tire and rim (1) is approximately 658 kg (1450 lb).

3. Remove nuts (2) and tire and rim (1).

Installation Procedure

1. Install tire and rim (1) in the reverse order of removal.

   Note: If new wheel studs were installed, tighten nuts (2) to a torque of 700 ± 100 N·m (516 ± 74 lb ft). After all nuts (2) are tightened, loosen nuts (2) prior to completing the torque procedure.

   1. Tighten nuts (2) to a torque of 450 ± 60 N·m (332 ± 44 lb ft). Turn nuts (2) an additional (60° ± 5°).