Improved Power Train Software is now Used on Certain Articulated Trucks {1901, 7490, 7610, 7620} Caterpillar


Improved Power Train Software is now Used on Certain Articulated Trucks {1901, 7490, 7610, 7620}

Usage:

735C LFJ
Articulated Truck
735C (S/N: LFJ1-254; TFJ1-251)
740C EJECTOR (S/N: LFN1-276; TFN1-182)
745C (S/N: LFK1-863; TFK1-1408)

Description Of Change: Improved power train software is now used on certain articulated trucks. The improved power train software helps prevent the potential for damaging interrupted shifts leading to premature clutch failures.

The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.

Adaptable To: Install the improved power train software in Table 1.

Table 1
Required Parts 
Qty  Part Number  Description  Former Part Number 
521-2516  Power Train Software Gp  511-8954 

Caterpillar Information System:

Installation of the 504-5707 Self-Cleaning Oil Filter and Centrifugal Oil Filter Kit On Certain C175 Off-Highway Truck Engines {1306, 1308, 1328} Installation of the 504-5707 Self-Cleaning Oil Filter and Centrifugal Oil Filter Kit On Certain C175 Off-Highway Truck Engines {1306, 1308, 1328}
Improved Process for Conditioner Gp Heater Hose Clamp on Certain K-Series Large Wheel Loader, Wheeled Dozer, Soil Compactor, and Landfill Compactor Machines {1380, 1808, 1812, 7304} Improved Process for Conditioner Gp Heater Hose Clamp on Certain K-Series Large Wheel Loader, Wheeled Dozer, Soil Compactor, and Landfill Compactor Machines {1380, 1808, 1812, 7304}
Procedure to Install Bucket Base Edges and Cast Corners Now Available for Various Load Haul Dump Machines {6800, 6801} Procedure to Install Bucket Base Edges and Cast Corners Now Available for Various Load Haul Dump Machines {6800, 6801}
Procedure to Install Machine Automation System on R1600H Load Haul Dump Machines {7000, 7600} Procedure to Install Machine Automation System on R1600H Load Haul Dump Machines {7000, 7600}
Extended Life Screed Plates Are Now Available {6643} Extended Life Screed Plates Are Now Available {6643}
New Platform Egress Ladder Mounting Hardware is Available For 24M Motor Graders {7254} New Platform Egress Ladder Mounting Hardware is Available For 24M Motor Graders {7254}
C13 Engines for Caterpillar Built Machines Inlet Air Is Restricted
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Hoist and Brake Tank Oil Sample - Obtain
Installation Procedure and Configuration for the Cat® Detect Proximity Awareness System - PL671 {7606, 7620} Installation Procedure and Configuration for the Cat® Detect Proximity Awareness System - PL671 {7606, 7620}
C13 Engines for Caterpillar Built Machines Shutdown - Test
C13 Engines for Caterpillar Built Machines Fuel System Water Separator Has Water
C13 Engines for Caterpillar Built Machines Coolant Temperature Is Low
Procedure to Install Improved Front Engine Mount Assemblies on Certain 773G and 775G Off-Highway Trucks {1152, 1153, 1154} Procedure to Install Improved Front Engine Mount Assemblies on Certain 773G and 775G Off-Highway Trucks {1152, 1153, 1154}
2570D and 2670D Wheel Feller Buncher Power Train Drive Shaft (Rear) - Remove and Install
994K Wheel Loader Machine Systems Hydraulic Tank - Remove and Install - Implement
994K Wheel Loader Machine Systems Hydraulic Tank - Remove and Install - Steering and Brake
C13 Engines for Caterpillar Built Machines Crankcase Pressure Is High
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Piston Pump - Disassemble - Main Hydraulic
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Piston Pump - Assemble - Main Hydraulic
C13 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
2570D and 2670D Wheel Feller Buncher Power Train Tire and Rim (Front) - Remove and Install
C13 Engines for Caterpillar Built Machines Engine Shutdown While Idling
The Welds on the Lower Fuel Tank Support Are Improved on the 797F Off-Highway Trucks {0679, 1273, 7050, 7051} The Welds on the Lower Fuel Tank Support Are Improved on the 797F Off-Highway Trucks {0679, 1273, 7050, 7051}
CS44B Vibratory Soil Compactor Propel Systems Visual Inspection
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.