Drive Shaft (Rear) - Remove and Install
Start By:
- Connect the steering frame lock.
- Remove bolts (1) and plate assembly (2).
Show/hide table
Illustration 2 g06140620 - Remove bolts (4) and use two people to remove drive shaft (rear) (3). The weight of drive shaft (rear) (3) is approximately
32 kg (71 lb) .
Show/hide table
| |
| Illustration 1 | g06140591 |
- Install drive shaft (rear) (3) in the reverse order of removal.
- Tighten bolts (4) to a torque of
120 ± 20 N·m (89 ± 15 lb ft) .
- Tighten bolts (4) to a torque of
Caterpillar Information System:
Procedure to Install Improved Front Engine Mount Assemblies on Certain 773G and 775G Off-Highway Trucks {1152, 1153, 1154} Procedure to Install Improved Front Engine Mount Assemblies on Certain 773G and 775G Off-Highway Trucks {1152, 1153, 1154}
Improved Power Train Software is now Used on Certain Articulated Trucks {1901, 7490, 7610, 7620} Improved Power Train Software is now Used on Certain Articulated Trucks {1901, 7490, 7610, 7620}
Installation of the 504-5707 Self-Cleaning Oil Filter and Centrifugal Oil Filter Kit On Certain C175 Off-Highway Truck Engines {1306, 1308, 1328} Installation of the 504-5707 Self-Cleaning Oil Filter and Centrifugal Oil Filter Kit On Certain C175 Off-Highway Truck Engines {1306, 1308, 1328}
Improved Process for Conditioner Gp Heater Hose Clamp on Certain K-Series Large Wheel Loader, Wheeled Dozer, Soil Compactor, and Landfill Compactor Machines {1380, 1808, 1812, 7304} Improved Process for Conditioner Gp Heater Hose Clamp on Certain K-Series Large Wheel Loader, Wheeled Dozer, Soil Compactor, and Landfill Compactor Machines {1380, 1808, 1812, 7304}
Procedure to Install Bucket Base Edges and Cast Corners Now Available for Various Load Haul Dump Machines {6800, 6801} Procedure to Install Bucket Base Edges and Cast Corners Now Available for Various Load Haul Dump Machines {6800, 6801}
Procedure to Install Machine Automation System on R1600H Load Haul Dump Machines {7000, 7600} Procedure to Install Machine Automation System on R1600H Load Haul Dump Machines {7000, 7600}
Extended Life Screed Plates Are Now Available {6643} Extended Life Screed Plates Are Now Available {6643}
New Platform Egress Ladder Mounting Hardware is Available For 24M Motor Graders {7254} New Platform Egress Ladder Mounting Hardware is Available For 24M Motor Graders {7254}
C13 Engines for Caterpillar Built Machines Inlet Air Is Restricted
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Hoist and Brake Tank Oil Sample - Obtain
Installation Procedure and Configuration for the Cat® Detect Proximity Awareness System - PL671 {7606, 7620} Installation Procedure and Configuration for the Cat® Detect Proximity Awareness System - PL671 {7606, 7620}
C13 Engines for Caterpillar Built Machines Shutdown - Test
994K Wheel Loader Machine Systems Hydraulic Tank - Remove and Install - Implement
994K Wheel Loader Machine Systems Hydraulic Tank - Remove and Install - Steering and Brake
C13 Engines for Caterpillar Built Machines Crankcase Pressure Is High
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Piston Pump - Disassemble - Main Hydraulic
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Piston Pump - Assemble - Main Hydraulic
C13 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
2570D and 2670D Wheel Feller Buncher Power Train Tire and Rim (Front) - Remove and Install
C13 Engines for Caterpillar Built Machines Engine Shutdown While Idling
The Welds on the Lower Fuel Tank Support Are Improved on the 797F Off-Highway Trucks {0679, 1273, 7050, 7051} The Welds on the Lower Fuel Tank Support Are Improved on the 797F Off-Highway Trucks {0679, 1273, 7050, 7051}
CS44B Vibratory Soil Compactor Propel Systems Visual Inspection
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Cat ET List Management
CS44B Vibratory Soil Compactor Propel Systems Propel System Troubleshooting