Instrument Panel (Lower) - Remove and Install
Start By:
- Connect the steering frame lock
- Turn the battery disconnect switch to the OFF position.
Show/hide table
Illustration 1 g03340261 Show/hide table
Illustration 2 g03340269 Show/hide table
Illustration 3 g03340329 - Remove screws (1) and screws (3). Move floor mat (4) out of the way. Cut cable straps (7) and position harness assembly (8) out of the way. Remove screws (5). Remove cover (2) and panel (6).
Show/hide table
Illustration 4 g03340561 - Disconnect harness assemblies (10). Remove screws (9) from each side of instrument panel (11). Remove instrument panel (11) from cover (2).
- Install instrument panel (11) in the reverse order of removal.
- Tighten screws (9) to a torque of
1.70 ± 2.04 N·m (15.05 ± 18.06 lb in) . - Tighten screws (1), (3), and (5) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
- Tighten screws (9) to a torque of
Caterpillar Information System:
980L Tier 3 Wheel Loader Machine System Loader Frame from Rear Frame - Separate
785G IV Off-Highway Truck Field Assembly Assembly Preparation
785G IV Off-Highway Truck Field Assembly Introduction
An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066} An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066}
2570D and 2670D Wheel Feller Buncher Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
980L Tier 3 Wheel Loader Machine System Electrohydraulic Control - Remove and Install
R1700 Load Haul Dump Engine Water Pump - Inspect
CP74B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Systems Smooth Drum Scraper
New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085} New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085}
C175-16 and C175-20 Engines for Caterpillar Built Machines High Pressure Fuel Rails - Remove and Install
MH3037 Material Handler Engine Supplement Flexible Exhaust Pipe - Remove and Install
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - First Stage Turbocharger
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Assemble
980L Tier 3 Wheel Loader Machine System Tilt Cylinder - Remove and Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Brake Accumulator - Test and Charge
Procedure to Rework the Axle Housing on R1600G and R1600H Load Haul Dump Machines {3260} Procedure to Rework the Axle Housing on R1600G and R1600H Load Haul Dump Machines {3260}
980L Tier 3 Wheel Loader Machine System Control Valve (Auxiliary) - Disassemble
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Lift and Tilt Cylinder Drift - Check
980L Tier 3 Wheel Loader Machine System Control Valve (Auxiliary) - Assemble
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Combination Valve (Brake Accumulator Charge, Fan Supply, Steering Pilot, Implement Pilot) - Assemble
A New Transmission Output Speed Sensor Mounting Bracket is Now Used on Certain 797F Large Off-Highway Truck {1408, 1439, 3160, 3175, 3258} A New Transmission Output Speed Sensor Mounting Bracket is Now Used on Certain 797F Large Off-Highway Truck {1408, 1439, 3160, 3175, 3258}
994K Wheel Loader Machine Systems Lift Arms - Remove and Install