Electrohydraulic Control - Remove and Install
- Remove cushion (1).
Show/hide table
Illustration 2 g02486722 - Remove plate (2).
Show/hide table
Illustration 3 g02486738 - Loosen knob (4) and remove arm rest (3).
Show/hide table
Illustration 4 g02486756 - Remove screws (5) and cover (6). Disconnect the harness assemblies from switch assemblies (7).
Show/hide table
Illustration 5 g02487117 - Remove screws (8) and cover (9).
Show/hide table
Illustration 6 g02487136 - Disconnect harness assemblies (12). Remove screws (11) and electrohydraulic controls (10).
Show/hide table
Illustration 7 g02487617 - Remove knob (13), screws (15), and boot (14).
Show/hide table
| |
| Illustration 1 | g02486616 |
- Install electrohydraulic controls (10) in the reverse order of removal.
- Tighten screws (5) and (8) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
- Tighten screws (5) and (8) to a torque of
Removal Procedure (Joystick Control)
- Remove four screws (1) and cover assembly (2).
Show/hide table
Illustration 9 g03019918 - Remove four screws (4) and cover (3).
Show/hide table
Illustration 10 g03019936 - Disconnect cable straps (5).
Show/hide table
Illustration 11 g03020336 - Disconnect cable straps (6) and harness assemblies (7).
Show/hide table
Illustration 12 g03020396 Show/hide table
Illustration 13 g03020416 - Reposition boot (8) out of the way. Remove four nuts (11) and four bolts (10). Remove joy stick (9).
Show/hide table
| |
| Illustration 8 | g03019889 |
Installation Procedure (Joystick Control)
- Install joy stick (9) in the reverse order of removal.
- Tighten nuts (11) to the following torque
6 ± 1 N·m (53 ± 9 lb in) .
- Tighten nuts (11) to the following torque
Caterpillar Information System:
R1700 Load Haul Dump Engine Water Pump - Inspect
CP74B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Systems Smooth Drum Scraper
New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085} New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085}
C175-16 and C175-20 Engines for Caterpillar Built Machines High Pressure Fuel Rails - Remove and Install
MH3037 Material Handler Engine Supplement Flexible Exhaust Pipe - Remove and Install
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - First Stage Turbocharger
Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058} Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058}
New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102} New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102}
New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
Wheeled Excavators and Wheeled Material Handlers Air Conditioning and Heating Cab Pressurization and Filtration System - If Equipped
PM310, PM312, and PM313 Cold Planer Stopping the Machine
2570D and 2670D Wheel Feller Buncher Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066} An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066}
785G IV Off-Highway Truck Field Assembly Introduction
785G IV Off-Highway Truck Field Assembly Assembly Preparation
980L Tier 3 Wheel Loader Machine System Loader Frame from Rear Frame - Separate
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Assemble
980L Tier 3 Wheel Loader Machine System Tilt Cylinder - Remove and Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Brake Accumulator - Test and Charge
Procedure to Rework the Axle Housing on R1600G and R1600H Load Haul Dump Machines {3260} Procedure to Rework the Axle Housing on R1600G and R1600H Load Haul Dump Machines {3260}