Smooth Drum Scraper
Show/hide table
Illustration 1 | g06130939 |
Show/hide table
Specification for 390-0614 Smooth Drum Scraper Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 4 | 396-8982 Shim | As required, use the shim in order to fill the gap. Thickness is |
2 | 18 | 176-5311 Locknut | Torque to |
Caterpillar Information System:
New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085} New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085}
C175-16 and C175-20 Engines for Caterpillar Built Machines High Pressure Fuel Rails - Remove and Install
MH3037 Material Handler Engine Supplement Flexible Exhaust Pipe - Remove and Install
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - First Stage Turbocharger
Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058} Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058}
New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102} New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102}
New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
Wheeled Excavators and Wheeled Material Handlers Air Conditioning and Heating Cab Pressurization and Filtration System - If Equipped
PM310, PM312, and PM313 Cold Planer Stopping the Machine
PM310, PM312, and PM313 Cold Planer Servicing the Rotor
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
R1700 Load Haul Dump Engine Water Pump - Inspect
980L Tier 3 Wheel Loader Machine System Electrohydraulic Control - Remove and Install
2570D and 2670D Wheel Feller Buncher Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066} An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066}
785G IV Off-Highway Truck Field Assembly Introduction
785G IV Off-Highway Truck Field Assembly Assembly Preparation
980L Tier 3 Wheel Loader Machine System Loader Frame from Rear Frame - Separate
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Assemble
980L Tier 3 Wheel Loader Machine System Tilt Cylinder - Remove and Install