New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085}
- Load Haul Dump
- R1600 (S/N: 9XP1-UP; 9EW1-UP)
- R1600G (S/N: 9PP1-UP; 9YZ1-UP)
- R1600H (S/N: 9SD1-279)
- R1600G (S/N: 9PP1-UP; 9YZ1-UP)
Description Of Change: A new implement, steering, pilot, and braking pump are now used. The new implement, steering, pilot, and braking pump is a gear type pump providing improved service life.
Adaptable To: The new implement, steering, pilot, and braking pump are adaptable to the above serial numbered machines, and effective in production with machines manufactured after the above listed serial numbers.
Show/hide table
| |
| Illustration 1 | g06130937 |
|
(1) | |
Refer to Special Instruction , M0067830 , Procedure to Rework the Implement, Steering, Pilot, and Braking Pump on R1600G and R1600H Load Haul Dump Machines to install the new 473-6041 Gear Pump Gp.
Caterpillar Information System:
C175-16 and C175-20 Engines for Caterpillar Built Machines High Pressure Fuel Rails - Remove and Install
MH3037 Material Handler Engine Supplement Flexible Exhaust Pipe - Remove and Install
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - First Stage Turbocharger
Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058} Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058}
New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102} New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102}
New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
Wheeled Excavators and Wheeled Material Handlers Air Conditioning and Heating Cab Pressurization and Filtration System - If Equipped
PM310, PM312, and PM313 Cold Planer Stopping the Machine
PM310, PM312, and PM313 Cold Planer Servicing the Rotor
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
PM310, PM312, and PM313 Cold Planer Capacities (Refill)
CP74B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Systems Smooth Drum Scraper
R1700 Load Haul Dump Engine Water Pump - Inspect
980L Tier 3 Wheel Loader Machine System Electrohydraulic Control - Remove and Install
2570D and 2670D Wheel Feller Buncher Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066} An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066}
785G IV Off-Highway Truck Field Assembly Introduction
785G IV Off-Highway Truck Field Assembly Assembly Preparation
980L Tier 3 Wheel Loader Machine System Loader Frame from Rear Frame - Separate
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Assemble