Diesel Exhaust Fluid Tank - Remove and Install
Show/hide table
Personal injury can result from hot coolant, steam and alkali. At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns. Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand. Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns. Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes. |
- Open door assembly (1).
Show/hide table
Illustration 2 g06131082 - Remove bolts (3) and open access panel (2).
Show/hide table
Illustration 3 g06131123 Enclosure removed for photographic purposes. - Open valve assembly (4) and allow the diesel exhaust fluid to drain.
Show/hide table
Illustration 4 g06131134 - Disconnect hose assemblies (5).
Show/hide table
Illustration 5 g06131141 - Loosen clamps (6) and disconnect hoses (7).
Show/hide table
Illustration 6 g06131171 - Disconnect harness assembly (10).
- Remove bolts (8) and diesel exhaust fluid tank (9).
Show/hide table
Illustration 1 | g06127972 |
- Install diesel exhaust fluid tank (9) in the reverse order of removal.
Caterpillar Information System:
980L Tier 3 Wheel Loader Machine System Electrohydraulic Control - Remove and Install
R1700 Load Haul Dump Engine Water Pump - Inspect
CP74B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Systems Smooth Drum Scraper
New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085} New Implement, Steering, Pilot, and Braking Pump Now Used on R1600G and R1600H Load Haul Dump Machines {4014, 4257, 4268, 4304, 4306, 5055, 5057, 5073, 5084, 5085}
C175-16 and C175-20 Engines for Caterpillar Built Machines High Pressure Fuel Rails - Remove and Install
MH3037 Material Handler Engine Supplement Flexible Exhaust Pipe - Remove and Install
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - First Stage Turbocharger
Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058} Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058}
New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102} New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102}
New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
Wheeled Excavators and Wheeled Material Handlers Air Conditioning and Heating Cab Pressurization and Filtration System - If Equipped
An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066} An Improved Transmission Pump is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3066}
785G IV Off-Highway Truck Field Assembly Introduction
785G IV Off-Highway Truck Field Assembly Assembly Preparation
980L Tier 3 Wheel Loader Machine System Loader Frame from Rear Frame - Separate
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Lift Arms - Remove and Install
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Assemble
980L Tier 3 Wheel Loader Machine System Tilt Cylinder - Remove and Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Brake Accumulator - Test and Charge
Procedure to Rework the Axle Housing on R1600G and R1600H Load Haul Dump Machines {3260} Procedure to Rework the Axle Housing on R1600G and R1600H Load Haul Dump Machines {3260}
980L Tier 3 Wheel Loader Machine System Control Valve (Auxiliary) - Disassemble