Seat - Remove and Install
- Disconnect harness assemblies (2). Remove bolts (3) and console (1). Repeat the Step for the opposite side.
Show/hide table
Illustration 2 g02416496 - Remove bolts (5) from seat (4)
Show/hide table
Illustration 3 g02416527 - Attach a suitable lifting device to seat (4). The weight of seat (4) is approximately
80 kg (176 lb) . Remove seat (4).
Show/hide table
Illustration 1 | g02416216 |
- Install seat (4) in the reverse order of the removal.
Caterpillar Information System:
980L Tier 3 Wheel Loader Machine System Window Wiper and Wiper Motor (Rear) - Remove and Install
980L Tier 3 Wheel Loader Machine System Window Wiper and Wiper Motor (Front) - Remove and Install
990K Wheel Loader Systems Steering Control Support
Check the Hydraulic Tank Baffle on Certain Load Haul Dump Machines {5056} Check the Hydraulic Tank Baffle on Certain Load Haul Dump Machines {5056}
Check the Tilt Lever on R3000H Load Haul Dump Machines {6107} Check the Tilt Lever on R3000H Load Haul Dump Machines {6107}
Rework Procedure to Install the Counterweight and Treat the Subframe Weld on the C-Series Knuckleboom Loaders {0679, 4150, 7050, 7051, 7056} Rework Procedure to Install the Counterweight and Treat the Subframe Weld on the C-Series Knuckleboom Loaders {0679, 4150, 7050, 7051, 7056}
Replacing the Implement Pump on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {3203, 5070, 5073} Replacing the Implement Pump on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {3203, 5070, 5073}
XT6 ES Hose Replacement Procedure on Certain Asphalt Compactors {5057} XT6 ES Hose Replacement Procedure on Certain Asphalt Compactors {5057}
A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C} A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C}
An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133} An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133}
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Water Pump - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Clutch - Remove and Install
Improved Modular Handle (Hoist) Is Now Used on Certain Large Off-Highway Trucks {3065, 5000, 5063, 5705} Improved Modular Handle (Hoist) Is Now Used on Certain Large Off-Highway Trucks {3065, 5000, 5063, 5705}
Procedure for Installing a Locking Set Screw into the Shift Handle on Certain Off-Highway Trucks {5063, 5705} Procedure for Installing a Locking Set Screw into the Shift Handle on Certain Off-Highway Trucks {5063, 5705}
XT6 ES Hose Replacement Procedure on Certain Soil Compactors {3154} XT6 ES Hose Replacement Procedure on Certain Soil Compactors {3154}
994K Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
Proper Maintenance Improves the Performance of the Circle Drive for Certain Motor Graders {5207} Proper Maintenance Improves the Performance of the Circle Drive for Certain Motor Graders {5207}
Measure the U-Cup Seal Groove on the Gland in the Front Suspension Group on Certain 795F and 797 Off-Highway Trucks {0756, 7200, 7201, 7555} Measure the U-Cup Seal Groove on the Gland in the Front Suspension Group on Certain 795F and 797 Off-Highway Trucks {0756, 7200, 7201, 7555}
730C and 730C2 EJECTOR Articulated Truck Systems Transmission Control (Shift Lever) - Calibrate
A Factory MineStar Ready Option and Retrofit Instructions are Now Available on Certain Motor Graders {7605, 7610, 7620} A Factory MineStar Ready Option and Retrofit Instructions are Now Available on Certain Motor Graders {7605, 7610, 7620}
A Diffuser for Rims is Now Available on Certain Off-Highway Trucks {4203, 5502, 7461} A Diffuser for Rims is Now Available on Certain Off-Highway Trucks {4203, 5502, 7461}
An Improved Fuel Filter and Fuel Transfer Pump are Now Used on Certain CP-533E, and CS-533E Vibratory Soil Compactors {1256} An Improved Fuel Filter and Fuel Transfer Pump are Now Used on Certain CP-533E, and CS-533E Vibratory Soil Compactors {1256}
An Improved Tube Assembly Is Now Used in the Pump Group Lines On Certain Motor Graders {5057} An Improved Tube Assembly Is Now Used in the Pump Group Lines On Certain Motor Graders {5057}
A New Traction Motor is Now Available on Certain 794 AC, 795F AC, and 795F XQ Off-Highway Trucks {1603, 5927} A New Traction Motor is Now Available on Certain 794 AC, 795F AC, and 795F XQ Off-Highway Trucks {1603, 5927}