A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C} Caterpillar

A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C}

Usage:

725C2 2L6

Articulated Truck: 725C (S/N: LFB1-235; TFB1-836); 725C2 (S/N: 2T31-238; 2L61-141); 730C (S/N: LFF1-495; TFF1-1413); 730C EJECTOR (S/N: LFH1-242; TFH1-160); 730C2 (S/N: 2T41-410; 2L71-200); 730C2 EJ (S/N: 2T51-135; 2L81-161)

Reference: Special Instruction , M0073104 , "Procedure to Install the Front Axle Grease Line Protective Cover on 725C, 730C, 730C Ejector, 725C2, 730C2, and 730C2 Ejector Articulated Trucks"

Description Of Change: A new installation procedure for installing the front axle grease line protective cover is now available on machines listed above. The new cover offers protection for the grease connection to the front axle A-frame. The new cover increases the service life of the machine.

Adaptable To: The grease line protective cover is adaptable to the products within the listed serial numbers, and is effective with all products after the listed serial numbers. For a complete list of required parts and the installation procedure refer to special instruction.

The Special Instruction can be found on the Caterpillar Service Information System (SIS) and through the normal literature distribution system at your local Cat dealer.

Caterpillar Information System:

An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133} An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133}

980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Water Pump - Remove and Install

PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Clutch - Remove and Install

C7.1 Engines and Generator Sets Valve Lash Is Excessive

C7.1 Engines and Generator Sets Power Is Intermittently Low or Power Cutout Is Intermittent

C7.1 Engines and Generator Sets Oil Pressure Is Low

C7.1 Engines and Generator Sets Oil Contains Fuel

994K Wheel Loader Machine Systems Cab - Remove and Install

C7.1 Engines and Generator Sets Oil Contains Coolant

980L Tier 3 Wheel Loader Machine System Lift Cylinder - Remove and Install

980L Tier 3 Wheel Loader Machine System Tilt Lever and Tilt Link - Remove and Install

C7.1 Engines and Generator Sets Oil Consumption Is Excessive

XT6 ES Hose Replacement Procedure on Certain Asphalt Compactors {5057} XT6 ES Hose Replacement Procedure on Certain Asphalt Compactors {5057}

Replacing the Implement Pump on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {3203, 5070, 5073} Replacing the Implement Pump on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {3203, 5070, 5073}

Rework Procedure to Install the Counterweight and Treat the Subframe Weld on the C-Series Knuckleboom Loaders {0679, 4150, 7050, 7051, 7056} Rework Procedure to Install the Counterweight and Treat the Subframe Weld on the C-Series Knuckleboom Loaders {0679, 4150, 7050, 7051, 7056}

Check the Tilt Lever on R3000H Load Haul Dump Machines {6107} Check the Tilt Lever on R3000H Load Haul Dump Machines {6107}

Check the Hydraulic Tank Baffle on Certain Load Haul Dump Machines {5056} Check the Hydraulic Tank Baffle on Certain Load Haul Dump Machines {5056}

990K Wheel Loader Systems Steering Control Support

980L Tier 3 Wheel Loader Machine System Window Wiper and Wiper Motor (Front) - Remove and Install

980L Tier 3 Wheel Loader Machine System Window Wiper and Wiper Motor (Rear) - Remove and Install

980L Tier 3 Wheel Loader Machine System Seat - Remove and Install

Improved Modular Handle (Hoist) Is Now Used on Certain Large Off-Highway Trucks {3065, 5000, 5063, 5705} Improved Modular Handle (Hoist) Is Now Used on Certain Large Off-Highway Trucks {3065, 5000, 5063, 5705}

Procedure for Installing a Locking Set Screw into the Shift Handle on Certain Off-Highway Trucks {5063, 5705} Procedure for Installing a Locking Set Screw into the Shift Handle on Certain Off-Highway Trucks {5063, 5705}

XT6 ES Hose Replacement Procedure on Certain Soil Compactors {3154} XT6 ES Hose Replacement Procedure on Certain Soil Compactors {3154}