Steering Control Support
Show/hide table
| |
| Illustration 1 | g06218963 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 2 | 9X-2043 Screw | Torque to |
| 2 | 2 | 9X-2045 Screw | Torque to |
| 3 | 2 | 342-6093 Ball Stud | Torque to |
| 4 | 1 | 317-1119 Bolt | Torque to |
| 5 | 2 | 8T-4178 Bolt | Torque to |
| 6 | 2 | 142-2304 Screw | Before assembly, apply blue Loctite 243 to threads.
Torque to |
| 7 | 1 | 9X-2041 Screw | Torque to |
| 8 | 1 | 8T-6685 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g06218970 |
|
Right side view | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 9 | 4 | 9X-2044 Screw | Torque to |
Caterpillar Information System:
Check the Hydraulic Tank Baffle on Certain Load Haul Dump Machines {5056} Check the Hydraulic Tank Baffle on Certain Load Haul Dump Machines {5056}
Check the Tilt Lever on R3000H Load Haul Dump Machines {6107} Check the Tilt Lever on R3000H Load Haul Dump Machines {6107}
Rework Procedure to Install the Counterweight and Treat the Subframe Weld on the C-Series Knuckleboom Loaders {0679, 4150, 7050, 7051, 7056} Rework Procedure to Install the Counterweight and Treat the Subframe Weld on the C-Series Knuckleboom Loaders {0679, 4150, 7050, 7051, 7056}
Replacing the Implement Pump on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {3203, 5070, 5073} Replacing the Implement Pump on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {3203, 5070, 5073}
XT6 ES Hose Replacement Procedure on Certain Asphalt Compactors {5057} XT6 ES Hose Replacement Procedure on Certain Asphalt Compactors {5057}
A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C} A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C}
An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133} An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133}
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Water Pump - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Clutch - Remove and Install
C7.1 Engines and Generator Sets Valve Lash Is Excessive
C7.1 Engines and Generator Sets Power Is Intermittently Low or Power Cutout Is Intermittent
C7.1 Engines and Generator Sets Oil Pressure Is Low
980L Tier 3 Wheel Loader Machine System Window Wiper and Wiper Motor (Front) - Remove and Install
980L Tier 3 Wheel Loader Machine System Window Wiper and Wiper Motor (Rear) - Remove and Install
980L Tier 3 Wheel Loader Machine System Seat - Remove and Install
Improved Modular Handle (Hoist) Is Now Used on Certain Large Off-Highway Trucks {3065, 5000, 5063, 5705} Improved Modular Handle (Hoist) Is Now Used on Certain Large Off-Highway Trucks {3065, 5000, 5063, 5705}
Procedure for Installing a Locking Set Screw into the Shift Handle on Certain Off-Highway Trucks {5063, 5705} Procedure for Installing a Locking Set Screw into the Shift Handle on Certain Off-Highway Trucks {5063, 5705}
XT6 ES Hose Replacement Procedure on Certain Soil Compactors {3154} XT6 ES Hose Replacement Procedure on Certain Soil Compactors {3154}
994K Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
Proper Maintenance Improves the Performance of the Circle Drive for Certain Motor Graders {5207} Proper Maintenance Improves the Performance of the Circle Drive for Certain Motor Graders {5207}
Measure the U-Cup Seal Groove on the Gland in the Front Suspension Group on Certain 795F and 797 Off-Highway Trucks {0756, 7200, 7201, 7555} Measure the U-Cup Seal Groove on the Gland in the Front Suspension Group on Certain 795F and 797 Off-Highway Trucks {0756, 7200, 7201, 7555}
730C and 730C2 EJECTOR Articulated Truck Systems Transmission Control (Shift Lever) - Calibrate
A Factory MineStar Ready Option and Retrofit Instructions are Now Available on Certain Motor Graders {7605, 7610, 7620} A Factory MineStar Ready Option and Retrofit Instructions are Now Available on Certain Motor Graders {7605, 7610, 7620}
A Diffuser for Rims is Now Available on Certain Off-Highway Trucks {4203, 5502, 7461} A Diffuser for Rims is Now Available on Certain Off-Highway Trucks {4203, 5502, 7461}