Water Pump - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | - | Water and Temperature Resistant Grease | 1 |
Start By:
- Remove the water temperature regulator.
- Remove left side engine panel (1).
Show/hide table
Illustration 2 g06129479 - Disconnect tube assembly (2) and hose (3).
- Disconnect hose (4) and (5).
Show/hide table
Illustration 3 g06129485 - Remove tube assembly (6). Loosen clamp (7) and disconnect hose (8).
- Loosen clamp (9) and position hose (10) out of the way.
Show/hide table
Illustration 4 g06129487 - Remove tube assembly (11). Loosen clamp (13) and remove the hose.
- Remove bolt (12) and the elbow.
Show/hide table
Illustration 5 g06129490 - Loosen clamp (16) and disconnect hose (17).
- Remove bolts (14) and elbow assembly (15).
Show/hide table
Illustration 6 g06129497 - Remove bolts (19) and water pump (18).
Show/hide table
Illustration 7 g06129504 - Remove O-ring seal (20) from water pump (18).
Show/hide table
Illustration 8 g06129509 - Remove seal (23).
- Remove bolts (21) and inlet cover (22).
Show/hide table
Illustration 9 g06129514 - Remove O-ring seal (24) from inlet cover (22).
Show/hide table
Illustration 1 | g06129530 |
- Install water pump (18) in the reverse order of removal.
- Apply Tooling (A) to all O-ring seals and seals in the installation procedure.
Caterpillar Information System:
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Clutch - Remove and Install
C7.1 Engines and Generator Sets Valve Lash Is Excessive
C7.1 Engines and Generator Sets Power Is Intermittently Low or Power Cutout Is Intermittent
C7.1 Engines and Generator Sets Oil Pressure Is Low
C7.1 Engines and Generator Sets Oil Contains Fuel
994K Wheel Loader Machine Systems Cab - Remove and Install
C7.1 Engines and Generator Sets Oil Contains Coolant
980L Tier 3 Wheel Loader Machine System Lift Cylinder - Remove and Install
980L Tier 3 Wheel Loader Machine System Tilt Lever and Tilt Link - Remove and Install
C7.1 Engines and Generator Sets Oil Consumption Is Excessive
793D Off-Highway Truck Power Train Torque Converter
C7.1 Engines and Generator Sets NRS Mass Flow Rate Problem
An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133} An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133}
A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C} A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C}
XT6 ES Hose Replacement Procedure on Certain Asphalt Compactors {5057} XT6 ES Hose Replacement Procedure on Certain Asphalt Compactors {5057}
Replacing the Implement Pump on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {3203, 5070, 5073} Replacing the Implement Pump on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {3203, 5070, 5073}
Rework Procedure to Install the Counterweight and Treat the Subframe Weld on the C-Series Knuckleboom Loaders {0679, 4150, 7050, 7051, 7056} Rework Procedure to Install the Counterweight and Treat the Subframe Weld on the C-Series Knuckleboom Loaders {0679, 4150, 7050, 7051, 7056}
Check the Tilt Lever on R3000H Load Haul Dump Machines {6107} Check the Tilt Lever on R3000H Load Haul Dump Machines {6107}
Check the Hydraulic Tank Baffle on Certain Load Haul Dump Machines {5056} Check the Hydraulic Tank Baffle on Certain Load Haul Dump Machines {5056}
990K Wheel Loader Systems Steering Control Support
980L Tier 3 Wheel Loader Machine System Window Wiper and Wiper Motor (Front) - Remove and Install
980L Tier 3 Wheel Loader Machine System Window Wiper and Wiper Motor (Rear) - Remove and Install
980L Tier 3 Wheel Loader Machine System Seat - Remove and Install
Improved Modular Handle (Hoist) Is Now Used on Certain Large Off-Highway Trucks {3065, 5000, 5063, 5705} Improved Modular Handle (Hoist) Is Now Used on Certain Large Off-Highway Trucks {3065, 5000, 5063, 5705}