Seat - Remove and Install
- Move the seat to the rearward position.
Show/hide table
Illustration 1 g03831660 - Remove bolt (2). Use two people in order to remove seat (1). The weight of seat (1) is approximately
32 kg (70 lb) . Remove seat (1).Show/hide table
Illustration 2 g03831664 - Remove bolts (5). Disconnect harness assembly (4). Use two people in order to remove seat adjuster (3). The weight of seat adjuster (3) is approximately
27 kg (60 lb) . Remove seat adjuster (3).
- Install seat (1) in the reverse order of removal.
Caterpillar Information System:
PL83 and PL87 Pipelayers Machine Systems Counterweight Cylinder - Remove and Install
527 Track-Type Skidder Reference Material
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620} New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test
CW34 Pneumatic Compactor Monitoring System
2015/05/14 Gear Inspection Should Be Performed When Replacing the Torsional Coupler on Certain 14M and 16M Motor Graders {3063}
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Determining Diagnostic Trouble Codes
CW34 Pneumatic Compactor Air Compressor Oil - Change
A SOS Port Can be Installed for Engine Oil Sampling on F2 Series Backhoe Loaders and Industrial Loaders Equipped with a C3.4 Engine {1306, 1308, 7542} A SOS Port Can be Installed for Engine Oil Sampling on F2 Series Backhoe Loaders and Industrial Loaders Equipped with a C3.4 Engine {1306, 1308, 7542}
CW34 Pneumatic Compactor Lifting and Tying Down the Machine
CW16 Pneumatic Compactor Ballast Information
CW34 Pneumatic Compactor Operation
Check the Tilt Cylinder on Certain R1700G and R2900G Load Haul Dump Machines{5104} Check the Tilt Cylinder on Certain R1700G and R2900G Load Haul Dump Machines{5104}
Check the Tilt Cylinder Line Relief Valve on R3000H Load Haul Dump Machines{5117} Check the Tilt Cylinder Line Relief Valve on R3000H Load Haul Dump Machines{5117}
Check Lift Arm Welds on R3000H Load Haul Dump Machines{6107} Check Lift Arm Welds on R3000H Load Haul Dump Machines{6107}
PL83 and PL87 Pipelayers Machine Systems Counterweight Sections - Remove and Install
Procedure to Install Machine Automation System on R1600H Load Haul Dump Machines {7000, 7600} Procedure to Install Machine Automation System on R1600H Load Haul Dump Machines {7000, 7600}
PL83 and PL87 Pipelayers Machine Systems Fairlead Sheave - Remove and Install
C2.2 Engines For Caterpillar Built Machines Glow Plug Starting Aid - Test
24M Motor Grader Rim - Inspect
C2.2 Engines For Caterpillar Built Machines Injector Solenoid - Test
415F2 and 427F2 Backhoe Loaders Engine Supplement Radiator, Fuel Cooler, After Cooler, and Hydraulic and XMSN Oil Cooler - Remove and Install
793F Off-Highway Truck (Command For Hauling) Machine Systems Front Wheel Bearings - Remove
777G Off-Highway Truck Steering System Steering Shaft (Cover Plate) - Check and Adjust