Fairlead Sheave - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0507     | Drive Plate     | 1     |
Start By:
- Remove the cable.
- Remove bolts (3), the washers, plate (4), pin (2), and sheave assembly (1) .
Show/hide table
Illustration 1 | g03832079 |
- Remove nut (7), bolt (5), and spacer (6) .
- Use a suitable press and Tooling (A) in order to remove bearing (8) (not shown) from sheave assembly (1) .
Show/hide table
Illustration 2 | g03836142 |
- Remove bearing (8) from sheave assembly (1) .
Installation Procedure
- Install sheave assembly (1) in the reverse order of removal.
Caterpillar Information System:
Procedure to Install Machine Automation System on R1600H Load Haul Dump Machines {7000, 7600} Procedure to Install Machine Automation System on R1600H Load Haul Dump Machines {7000, 7600}
PL83 and PL87 Pipelayers Machine Systems Counterweight Sections - Remove and Install
Check Lift Arm Welds on R3000H Load Haul Dump Machines{6107} Check Lift Arm Welds on R3000H Load Haul Dump Machines{6107}
Check the Tilt Cylinder Line Relief Valve on R3000H Load Haul Dump Machines{5117} Check the Tilt Cylinder Line Relief Valve on R3000H Load Haul Dump Machines{5117}
Check the Tilt Cylinder on Certain R1700G and R2900G Load Haul Dump Machines{5104} Check the Tilt Cylinder on Certain R1700G and R2900G Load Haul Dump Machines{5104}
PL83 and PL87 Pipelayers Machine Systems Seat - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Counterweight Cylinder - Remove and Install
527 Track-Type Skidder Reference Material
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620} New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test
CW34 Pneumatic Compactor Monitoring System
2015/05/14 Gear Inspection Should Be Performed When Replacing the Torsional Coupler on Certain 14M and 16M Motor Graders {3063}
C2.2 Engines For Caterpillar Built Machines Glow Plug Starting Aid - Test
24M Motor Grader Rim - Inspect
C2.2 Engines For Caterpillar Built Machines Injector Solenoid - Test
415F2 and 427F2 Backhoe Loaders Engine Supplement Radiator, Fuel Cooler, After Cooler, and Hydraulic and XMSN Oil Cooler - Remove and Install
793F Off-Highway Truck (Command For Hauling) Machine Systems Front Wheel Bearings - Remove
777G Off-Highway Truck Steering System Steering Shaft (Cover Plate) - Check and Adjust
793F Off-Highway Truck (Command For Hauling) Machine Systems Front Wheel Bearings - Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Piston Pump (Fan) - Disassemble
C13, C15, and C18 Engines for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
Installation of the 435-9232 Air Conditioner Kit (Conversion) {1408, 7304, 7309, 7320, 7320, 734D} Installation of the 435-9232 Air Conditioner Kit (Conversion) {1408, 7304, 7309, 7320, 7320, 734D}
2015/05/15 Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15 Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}