Start By:
- Remove the bank valves. Refer to Disassembly and Assembly, "Bank Valve - Remove".
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove nuts (1).
Show/hide table
Illustration 2 g03434219 - Remove cover (2). Remove seal (3).
- Remove control valve (4). Remove seal (5). Repeat this step for the remaining control valves.
Show/hide table
Illustration 3 g03434232 Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove plug (6). Remove check valve (7). Remove bolt (8) in order to remove solenoid (10). Remove check valve (9). Remove bolt (11) in order to remove solenoid (12). Remove plug (13).
Show/hide table
Illustration 4 g01361634 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove plug (14). Remove spring (15). Remove ball (16). Remove spring (17). Remove spool (18). Remove plug (19).
Show/hide table
Illustration 5 g01361643 - Remove pistons (20).
Show/hide table
Illustration 6 g01361658 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove bolts (21). Remove cover (22). Remove retainer (23). Remove spring (24). Remove retainer (25). Remove plug (26). Remove spool (27).
Show/hide table
Illustration 7 g03434961 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove bolts (28). Remove cover (29).
Show/hide table
Illustration 8 g03435437 - Remove O-ring seals (30) from check valve (7).
Show/hide table
Illustration 9 g03435456 - Remove O-ring seals (31) from check valve (10).
Show/hide table
Illustration 10 g03435645 - Remove O-ring seals (32) from solenoid (9).
Show/hide table
Illustration 11 g03435658 - Remove O-ring seals (33) from solenoid (12).
- Repeat Step 3 through Step 12 for the remaining control valves.
Show/hide table
Illustration 12 g03435661 - Remove tie rods (34).
Show/hide table
Illustration 13 g03435676 - Remove fittings (35). Remove fitting (36). Remove fitting (37). Remove fitting (38). Remove fitting (39).
Show/hide table
Illustration 14 g03435699 - Remove plugs (40). Remove plugs (41). Remove plug (42). Remove relief valve (43).
Show/hide table
Illustration 15 g03435707 - Remove orifice (44).
Show/hide table
Illustration 16 g03435709 - Remove O-ring seals (46) from relief valve (45).
| |
| Illustration 1 | g03434195 |
