Steering Linkage - Lubricate
Front Legs
Show/hide table
 | |
| Illustration 1 | g03433756 |
Lubricate two fittings on the front side of each front leg with multipurpose grease.
Show/hide table
 | |
| Illustration 2 | g03433777 |
Lubricate one fitting on the rear side of each front leg with multipurpose grease.
Rear Legs
Show/hide table
 | |
| Illustration 3 | g03433796 |
Lubricate four fittings on the internal side of each rear leg with multipurpose grease.
Show/hide table
 | |
| Illustration 4 | g03433817 |
Lubricate one fitting on the front side of each rear leg with multipurpose grease.
Caterpillar Information System:
Cat® Detect Proximity Awareness Onboard System Proximity Alarming
2013/09/24 A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
Cat® Detect Proximity Awareness Onboard System Tool Button Display
14L Motor Grader Machine Systems Bank Valve - Install - Rear Frame
14L Motor Grader Machine Systems Bank Valve - Disassemble - Rear Frame
14L Motor Grader Machine Systems Bank Valve - Assemble - Rear Frame
PM-200 Cold Planer Track Drive Planetary Oil - Change
PM-200 Cold Planer Track Drive Planetary Oil Level - Check
834K Wheel Dozer and 836K Landfill Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 834K Wheel Dozer and 836K Landfill Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
PM-200 Cold Planer Track Shoe Bolts - Tighten
PM-200 Cold Planer Track Tension - Check/Adjust
PM-200 Cold Planer Tracks - Inspect
PM-200 Cold Planer Steering Cylinder Ends - Lubricate
PM-200 Cold Planer Upper Conveyor Deflectors (Second Stage) - Inspect/Replace
988K XE Wheel Loader Machine Systems Ride Control Valve - Assemble
AS4173 Asphalt Screed Machine Systems Tamper Bar - Check and Adjust
2014/02/12 New Installation Kits are now Available for Cat® MineStar Fleet Onboard and Cat® MineStar Health Systems {7605}
2013/12/06 New Exhaust Shield Now Used on Certain R1700G Load Haul Dump Machines {1067}
2013/09/20 New Procedure to Flash LADAR Firmware Now Used on MINEGEM Equipped Machines {7600, 7615}
PM-200 Cold Planer Engine Oil and Filter - Change
966M Series XE and 972M Series XE Wheel Loaders Plate Locations and Film Locations
PM-200 Cold Planer Engine Oil Level - Check
PL83 and PL87 Pipelayers Engine Supplement Fuel Filter Base and Priming Pump - Remove and Install
PM-200 Cold Planer Engine Oil Sample - Obtain