Track Shoe Bolts - Tighten
Show/hide table
 | |
| Illustration 1 | g03433013 |
Note: Apply SAE 30W oil to bolt threads.
The torque requirement for track shoe bolts is 170 ± 20 N·m (126 ± 15 lb ft). Tighten the bolts for an additional 120 degrees.
Caterpillar Information System:
PM-200 Cold Planer Track Tension - Check/Adjust
PM-200 Cold Planer Tracks - Inspect
966M Series XE and 972M Series XE Wheel Loaders Rated Load
CB34B, CB34B XW, CC34B and CB36B Vibratory Utility Compactors Machine Systems Vibratory Valve - Remove and Install
CB34B, CB34B XW, CC34B and CB36B Vibratory Utility Compactors Machine Systems Piston Pump (Propel) - Remove and Install
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Propel System Piston Motor (Drum Propel)
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) MID 134 - CID 3319 - FMI 12
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) MID 134 - CID 3319 - FMI 09
793F Series AC Off-Highway Truck Power Train Power Generator - Remove and Install
986H Wheel Loader Machine Systems Diverter Valve (Secondary Steering)
770G and 772G Off-Highway Truck/Tractors CAN Data Link - Test
AS4173 Asphalt Screed Machine Systems Deflector - Check and Adjust
834K Wheel Dozer and 836K Landfill Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 834K Wheel Dozer and 836K Landfill Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
PM-200 Cold Planer Track Drive Planetary Oil Level - Check
PM-200 Cold Planer Track Drive Planetary Oil - Change
14L Motor Grader Machine Systems Bank Valve - Assemble - Rear Frame
14L Motor Grader Machine Systems Bank Valve - Disassemble - Rear Frame
14L Motor Grader Machine Systems Bank Valve - Install - Rear Frame
Cat® Detect Proximity Awareness Onboard System Tool Button Display
2013/09/24 A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
Cat® Detect Proximity Awareness Onboard System Proximity Alarming
PM-200 Cold Planer Steering Linkage - Lubricate
PM-200 Cold Planer Steering Cylinder Ends - Lubricate
PM-200 Cold Planer Upper Conveyor Deflectors (Second Stage) - Inspect/Replace