2013/09/24 Caterpillar


A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}

Usage:

769C 01X
Caterpillar Products:
  • All
  • Service Magazine SEPD1667, 19 September 2013, "A New Ether Bottle Seal is Now Used on All Caterpillar Products". Disregard the information in the article that is listed above. Refer to the information in the following article.

    Description of Change:




    Illustration 1g03434296

    A new O-ring is now used to eliminate corrosion on the threads of the ether cylinder. The new O-ring seals between the ether cylinder/valve joint and the ambient environment. This O-ring will not allow moisture or debris to enter this area, cause corrosion, or bond the cylinder to the valve. Appropriate O-ring and installation instruction will be provided with each ether cylinder.

    Adaptable To: The new O-ring is adaptable to all Caterpillar products using an Ether Cylinder As.

    Caterpillar Information System:

    Cat® Detect Proximity Awareness Onboard System Tool Button Display
    14L Motor Grader Machine Systems Bank Valve - Install - Rear Frame
    14L Motor Grader Machine Systems Bank Valve - Disassemble - Rear Frame
    14L Motor Grader Machine Systems Bank Valve - Assemble - Rear Frame
    PM-200 Cold Planer Track Drive Planetary Oil - Change
    PM-200 Cold Planer Track Drive Planetary Oil Level - Check
    834K Wheel Dozer and 836K Landfill Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 834K Wheel Dozer and 836K Landfill Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
    PM-200 Cold Planer Track Shoe Bolts - Tighten
    PM-200 Cold Planer Track Tension - Check/Adjust
    PM-200 Cold Planer Tracks - Inspect
    966M Series XE and 972M Series XE Wheel Loaders Rated Load
    CB34B, CB34B XW, CC34B and CB36B Vibratory Utility Compactors Machine Systems Vibratory Valve - Remove and Install
    Cat® Detect Proximity Awareness Onboard System Proximity Alarming
    PM-200 Cold Planer Steering Linkage - Lubricate
    PM-200 Cold Planer Steering Cylinder Ends - Lubricate
    PM-200 Cold Planer Upper Conveyor Deflectors (Second Stage) - Inspect/Replace
    988K XE Wheel Loader Machine Systems Ride Control Valve - Assemble
    AS4173 Asphalt Screed Machine Systems Tamper Bar - Check and Adjust
    2014/02/12 New Installation Kits are now Available for Cat® MineStar Fleet Onboard and Cat® MineStar Health Systems {7605}
    2013/12/06 New Exhaust Shield Now Used on Certain R1700G Load Haul Dump Machines {1067}
    2013/09/20 New Procedure to Flash LADAR Firmware Now Used on MINEGEM Equipped Machines {7600, 7615}
    PM-200 Cold Planer Engine Oil and Filter - Change
    966M Series XE and 972M Series XE Wheel Loaders Plate Locations and Film Locations
    PM-200 Cold Planer Engine Oil Level - Check
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.