Revised Special Instruction, SEHS9160, "Replacing The Spacer On The Cutter Wheel And Changing The Height Dimension Of The Cutter Wheel On tTe 4C-5084 Oil Filter Cutter" Is Available {0678,1261,1308,3004,3067,4070,5068,5092,5177}
Usage:
All Machines Equipped With Spin-On Oil Filters
Special Instruction, SEHS9160, "Replacing the Spacer on the Cutter Wheel and Changing the Height Dimension of the Cutter Wheel on the 4C-5084 Oil Filter Cutter" has been revised. This revised Special Instruction contains the necessary procedures and information for replacing the spacer and changing the height dimension of the cutter wheel on the 4C-5084 Oil Filter Cutter.
Special Instruction SEHS9160 can be ordered through normal corporate literature ordering channels.
Caterpillar Information System:
1997/06/30 Certain Publications Are Now Printed On Demand {0374}
1997/06/30 Dealer PC Hardware Purchase Recommendations For All Caterpillar Applications {7600,7601,1920}
1997/06/23 Improved 2-Pin Deutsch® DT Connector Now Used {7553}
1997/06/09 Improved Coolant Flow Switches Available {7425}
1997/06/09 Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/05/26 Correct Orientation For 3E-8827, 9X-6796, 9X-9096, 107-7977, 117-1379, 121-4134, 121-4135, 125-9597, And 132-2156 Alternators During Installation{1405}
1997/05/26 Safety Manuals For Each Product Line Are Available{0353,0375}
1997/05/05 New Service Magazine Special Edition (Product Support Update-3500 Machine Engines) Available {1000}
1997/05/05 Machine Electrical Systems Schematics With New Format {1400}
1997/04/28 Improved Cylinder Liner Has Longer Service Life{1216}
1997/04/28 More Frequent S*O*S Oil Analysis Improves Component Life Cycle Management{7542,7500}
1997/04/14 Rugged, Full-Function, PC Workstation For Dealers And Customers Service Shops {7569}
1997/07/07 Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/28 Required Maintenance Of Air Cleaner Dust Valves{1050,1051,1055,1068}
1997/07/28 Protection Of Unsealed Electrical Terminations For Machines Used In Corrosive Applications{1400}
1997/08/18 Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18 Use Separate Sampling Pump For Oil and Coolant {7542,7577}
1997/08/18 "Date Updated" Displayed In Parts Manuals On The Service Information System (SIS) {7567}
1997/08/25 New Parts Manual Format Used For Certain Caterpillar Products{0374}
1997/09/01 Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/08 3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/29 Handling Instructions For Water Pumps{1361}
1997/10/06 Service Charts And Decals Available{0374,0375}
1997/10/06 Proper Welding Procedure On Machines And Engines With Electronic Controls{1400}