C3.4B Industrial Engine Caterpillar


Fan Clearance - Check

Usage:

3.4B C88
Existují různé typy chladicích systémů. Informace o bezpečné vzdálenosti ventilátoru získáte od výrobce zařízení.

Ujistěte se, že je motor zastavený. Ujistěte se, že je odpojovací vypínač akumulátoru v poloze VYPNUTO. Ujistěte se, že je zcela naplněn chladicí systém. Bude potřebné zkontrolovat vzdálenost mezi krytem (1) a ventilátorem (2). Mezeru (A) mezi okrajem krytu a koncem lopatky ventilátoru je nutné zkontrolovat na čtyřech rovnoměrně vzdálených místech.



Ilustrace 1g02585058
Typický příklad

Vzdálenost (mezeru) mezi okrajem krytu a koncem lopatky ventilátoru lze změnit nastavením krytu. Ujistěte se, že je kryt vycentrován vzhledem k ventilátoru.

Vzdálenost (A) je nutné nastavit na 10 ± 1 mm (0.39370 ± 0.03937 inch).

Caterpillar Information System:

541 Series 2 Track Feller Buncher and 552 Series 2 Track Feller Buncher Machine Systems Leveling System
C27 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
2013/09/12 A New Aftercooler Core Assembly is Now Used in the Air Aftercooler Group on the 773F and 775F Off-Highway Trucks {1063, 1353, 1806}
2011/07/08 A New Pump Control Valve Group is Now Used on the Piston Pump Groups on Certain Off-Highway Trucks {5070}
541 Series 2 Track Feller Buncher and 552 Series 2 Track Feller Buncher Machine Systems Control Valve (Travel)
992K Wheel Loader Object Detection Sensor - Clean/Inspect
541 Series 2 Track Feller Buncher and 552 Series 2 Track Feller Buncher Machine Systems Travel System
3516B Engine for 994F and 994H Wheel Loaders Throttle Lock - Test
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Center Axle - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Vibration Damper
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Front Axle - Remove and Install
2011/06/02 A New Direction and Speed Control Gp is now Available for Certain Vibratory Asphalt Compactors {5462}
AP1000E and BG1000E Asphalt Pavers Machine Systems Fan Speed (Ventilation) - Test
PL83 and PL87 Pipelayers Power Train Sprocket Segment - Remove and Install
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Motor Case Drain Flow (Generator) - Test
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Pilot Solenoid Only
PL83 and PL87 Pipelayers Power Train Track Roller - Remove and Install
AP1000E and BG1000E Asphalt Pavers Machine Systems Conveyor Drive Chain (Auger) - Check and Adjust
AP1000E and BG1000E Asphalt Pavers Machine Systems Conveyor Drive Chain (Drag) - Check and Adjust
AP1000E and BG1000E Asphalt Pavers Machine Systems Conveyor Chain (Drag) - Check and Adjust
AP1000E and BG1000E Asphalt Pavers Machine Systems Generator Frequency - Test and Adjust
AP1000E and BG1000E Asphalt Pavers Machine Systems Relief Valve (Charge) - Test and Adjust - Generator
PL83 and PL87 Pipelayers Power Train Front Track Roller Frame - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.