777G Off-Highway Truck Caterpillar


Lubrication Pump Oil Level - Check

Usage:

777G GT7

------ VÝSTRAHA! ------

Zvednutá korba (lože korby) může neočekávaně spadnout bez předchozích náznaků pádu a způsobit vážný nebo smrtelný úraz.

Pokud je nezbytné pracovat pod damprem se zdviženou korbou (ložem korby), zasuňte bezpečnostní čepy korby (lože korby) do otvorů pro čepy v rámu a na vzpěrných konzolách na korbě.


  1. Zaparkujte stroj na rovném povrchu. Přesvědčte se, že se ovladač převodovky nachází v poloze PARKOVÁNÍ.

  2. Zvedněte korbu do zcela zvednuté polohy a instalujte přídržné čepy korby. Správný postup viz Příručka pro provoz a údržbu, "Přídržný čep korby".

  3. Vypněte motor.


    Ilustrace 1g02546737
    Čerpadlo automatického mazání se nachází mezi nosníky rámu nad převodovkou.

  4. Vyjměte hladinoměr oleje (1). Prohlédněte měřidlo a určete hladinu oleje.

  5. Udržujte hladinu oleje na značce (2) na měřidle. Doplňte olej podle potřeby.

Caterpillar Information System:

2011/05/26 New Cylinder Pack Assemblies Are Available in Sets for Certain Machines Equipped with C18 Engines {1201, 1216, 1225, 1239}
C13, C15, and C18 Tier 4 Final Engines Exhaust Gas Valve (NRS)
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280} NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
PL83 Pipelayer Reference Material
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Install
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Remove
PL83 Pipelayer Transmission System Oil Sample - Obtain
521B and 522B Track Feller Bunchers Swing Drive Oil Sample - Obtain
521B and 522B Track Feller Bunchers Swing Drive Oil - Change
AP1000F Asphalt Paver Machine Systems Hydraulic Filter (Suction Return) - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Refrigerant Dryer - Replace
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Sample - Obtain
Comfort Series Seat For Caterpillar Machines Optimized Seat with Lumbar, Side Controls, and Slide Swivel
777G Off-Highway Truck Lubrication Pump Oil - Change
3516B Engine for 994F and 994H Wheel Loaders Configuration Parameters
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Motor (Propel) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Motor (Propel) - Install
AP1000F Asphalt Paver Machine Systems Final Drive Planetary - Remove
AP1000F Asphalt Paver Machine Systems Final Drive Planetary - Install
2011/07/20 An Updated Procedure for the Inspection, Repair, and Component Replacement on the Frames of Certain Off-Highway Trucks is Available {7000, 7051}
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164} Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.