C9.3 Engines for Caterpillar Built Machines Caterpillar


Inlet and Exhaust Valve Seat Inserts - Remove and Install

Usage:

725C2 2L6

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
9S-3095  拉拔器手柄 
6V-4194
(1) 
气门座拔取器 
1U-9167
(2)
气门座拔取器 
4C-6372(3)  气门座冲头 
364-4009(4) 气门座冲头 
(1) 结合排气门座使用
(2) 结合进气门座使用
(3) 结合排气门座使用
(4) 结合进气门座使用

开始:

  1. 拆下进气门和排气门。


    图 1g01137634

  1. 使用工具 (A) 和工具 (B),拆下气门座镶圈 (1)。

安装步骤



    图 2g01137637

    注: 不要为了纠正气门杆突出而加工已经加工好的气门座镶圈。 气门杆突出说明气门座镶圈没有安装到位或镗孔底部残渣未清理干净。

  1. 按与拆卸相反的顺序安装气门座镶圈 (1)。 降低新气门座镶圈 (1) 的温度。 使用工具 (C) ,在缸盖中安装气门座镶圈 (1)。

Caterpillar Information System:

C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
2011/07/20 An Updated Procedure for the Inspection, Repair, and Component Replacement on the Frames of Certain Off-Highway Trucks is Available {7000, 7051}
AP1000F Asphalt Paver Machine Systems Final Drive Planetary - Install
AP1000F Asphalt Paver Machine Systems Final Drive Planetary - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Motor (Propel) - Install
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Motor (Propel) - Remove
3516B Engine for 994F and 994H Wheel Loaders Configuration Parameters
777G Off-Highway Truck Lubrication Pump Oil - Change
Comfort Series Seat For Caterpillar Machines Optimized Seat with Lumbar, Side Controls, and Slide Swivel
777G Off-Highway Truck Lubrication Pump Oil Level - Check
2011/05/26 New Cylinder Pack Assemblies Are Available in Sets for Certain Machines Equipped with C18 Engines {1201, 1216, 1225, 1239}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164} Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
E SeriesBackhoe Loader Stabilizer Cylinder Drift{5468} E SeriesBackhoe Loader Stabilizer Cylinder Drift{5468}
541 Series 2 and 552 Series 2 Track Feller Bunchers Condenser (Refrigerant) - Clean
521B and 522B Track Feller Bunchers Monitoring System - System Setup and Change
793F Off-Highway Truck Damper (Crankshaft) - Inspect
C9.3 Tier 4 Final Engines Electronic Unit Injector Wiring
C175-16 and C175-20 Generator Set Engines Fuel Injector
C4.4 Engines For Caterpillar Built Machines CID 0001 FMI 05
C4.4 Engines For Caterpillar Built Machines CID 0001 FMI 06
C4.4 Engines For Caterpillar Built Machines CID 0002 FMI 05
C4.4 Engines For Caterpillar Built Machines CID 0002 FMI 06
C4.4 Engines For Caterpillar Built Machines CID 0003 FMI 05
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.