Hydraulic Filter (Suction Return) - Remove and Install
拆卸步骤
Show/hide table
 |
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后，液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前，如果不事先释放压力，可能会造成严重伤害。 卸下液压系统的部件或管路时，确保所有的作业机具都已降到地面上，而且液压油温度已冷。 只能在发动机停机，并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修机器时，务必小心，确保用容器盛接流出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器，请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。 根据当地法规处置所有液体。 |
注: 为便于安装，在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。
- 打开检修面板 (1) 。
Show/hide table
 | |
| 图 1 | g02549091 |
- 将盖 (2) 从壳体 (3) 上拆下。
Show/hide table
 | |
| 图 2 | g02549092 |
- 将 O 形密封圈 (4) 从盖 (2) 上拆下。
Show/hide table
 | |
| 图 3 | g02549087 |
- 将滤清器组件从壳体 (3) 上拆下。
Show/hide table
 | |
| 图 4 | g02549090 |
- 将盖 (5) 从滤清器滤芯 (7) 上拆下。 将 O 形密封圈 (6) 从盖 (5) 上拆下。
安装步骤
- 将 O 形密封圈 (6) 安装到盖 (5) 。 将盖 (5) 安装到滤清器滤芯 (7) 。
Show/hide table
| | |
| 图 5 | g02549090 |
- 将滤清器组件安装到壳体 (3) 。
- 将 O 形密封圈 (4) 安装到盖 (2) 上。
Show/hide table
| | |
| 图 6 | g02549087 |
- 将盖 (2) 安装到壳体 (3) 。
Show/hide table
| | |
| 图 7 | g02549092 |
- 关闭检修面板 (1) 。
Show/hide table
| | |
| 图 8 | g02549091 |
Caterpillar Information System:
541 Series 2 and 552 Series 2 Track Feller Bunchers Refrigerant Dryer - Replace
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Sample - Obtain
C9.3 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Level (Hood Tilt) - Check
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Level - Check
AP1055E Asphalt Paver Equipped with a Cat C6.6 Engine Safety Messages
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Filter (Return) - Replace
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Filter (Case Drain) - Replace
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Filter (Pilot) - Replace
2011/05/09 New Steering Cylinder Sensor Harnesses are now Available for Certain M Series Motor Graders {1408}
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
541 Series 2 and 552 Series 2 Track Feller Bunchers Hub Oil (Flexxaire Fan) - Change
521B and 522B Track Feller Bunchers Swing Drive Oil - Change
521B and 522B Track Feller Bunchers Swing Drive Oil Sample - Obtain
PL83 Pipelayer Transmission System Oil Sample - Obtain
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Install
PL83 Pipelayer Reference Material
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280} NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
C13, C15, and C18 Tier 4 Final Engines Exhaust Gas Valve (NRS)
2011/05/26 New Cylinder Pack Assemblies Are Available in Sets for Certain Machines Equipped with C18 Engines {1201, 1216, 1225, 1239}
777G Off-Highway Truck Lubrication Pump Oil Level - Check
Comfort Series Seat For Caterpillar Machines Optimized Seat with Lumbar, Side Controls, and Slide Swivel
777G Off-Highway Truck Lubrication Pump Oil - Change