PL83 Pipelayer Caterpillar


Transmission System Oil Sample - Obtain

Usage:

PL83 KSD

------ WARNING! ------

热油和热的部件可能会导致人身伤害。

不要让热油或热的部件与皮肤接触。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。


对变速箱油进行取样的时间应尽可能靠近推荐的取样间隔。 建议的取样间隔为每 500 工作小时。 为了获得最佳的 S·O·S 油样分析效果,必须建立一个一致的数据趋势。 为建立适当的数据历史,必须以均匀的间隔进行一致的机油取样。

S·O·S 采样孔位于变速箱油滤清器底座上。




    图 1g02549100

    后视图

  1. 变速箱油滤清器位于操作台下方,靠近右挡泥板。



    图 2g01210348

  1. 拆下取样端口的保护盖。

  1. 获取变速箱油样。 有关获取变速箱油样的资料,请参阅专门出版物, SEBU6250, "S·O·S 油样分析"。

  1. 完成取样后,从瓶中取出带导管的盖和探头。 废弃带导管的盖和探头。 安装 169-8373 油样瓶附带的密封盖 。

  1. 更换保护帽。

有关变速箱系统机油的更多信息,请参阅专门出版物, SEBU6250, "Caterpillar 机器油液建议",或咨询您的 Caterpillar 代理商。

Caterpillar Information System:

521B and 522B Track Feller Bunchers Swing Drive Oil Sample - Obtain
521B and 522B Track Feller Bunchers Swing Drive Oil - Change
AP1000F Asphalt Paver Machine Systems Hydraulic Filter (Suction Return) - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Refrigerant Dryer - Replace
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Sample - Obtain
C9.3 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Level (Hood Tilt) - Check
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Level - Check
AP1055E Asphalt Paver Equipped with a Cat C6.6 Engine Safety Messages
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Filter (Return) - Replace
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Filter (Case Drain) - Replace
541 Series 2 and 552 Series 2 Track Feller Bunchers Hydraulic System Oil Filter (Pilot) - Replace
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Install
PL83 Pipelayer Reference Material
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280} NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
C13, C15, and C18 Tier 4 Final Engines Exhaust Gas Valve (NRS)
2011/05/26 New Cylinder Pack Assemblies Are Available in Sets for Certain Machines Equipped with C18 Engines {1201, 1216, 1225, 1239}
777G Off-Highway Truck Lubrication Pump Oil Level - Check
Comfort Series Seat For Caterpillar Machines Optimized Seat with Lumbar, Side Controls, and Slide Swivel
777G Off-Highway Truck Lubrication Pump Oil - Change
3516B Engine for 994F and 994H Wheel Loaders Configuration Parameters
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Motor (Propel) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Motor (Propel) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.