Axle Mounting (Rear)
Show/hide table
Illustration 1 | g02178723 |
(1) Torque for the 70 bolts ... 900 ± 100 N·m (660 ± 75 lb ft)
(2) Lubricate the seals with a small amount of the lubricant that is being sealed immediately before assembly.
(3) Torque for the 28 bolts ... 270 ± 40 N·m (200 ± 30 lb ft)
Note: Apply Loctite 271TM to the threads of the bolts (3) .
(4) Torque for the 24 bolts ... 105 ± 20 N·m (77.4 ± 14.8 lb ft)
Caterpillar Information System:
C6.6 Industrial Engine Flywheel - Remove
C27 and C32 Engines for Caterpillar Built Machines Exhaust Pipe
C6.6 Industrial Engine Water Temperature Regulator - Remove and Install
C6.6 Industrial Engine Water Pump - Install
C6.6 Industrial Engine Water Pump - Remove
C6.6 Industrial Engine Engine Oil Pump - Install
C6.6 Industrial Engine Engine Oil Pump - Remove
C6.6 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C6.6 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
C6.6 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
773G and 775G Off-Highway Truck Power Train Differential
C6.6 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C6.6 Industrial Engine Flywheel - Install
C6.6 Industrial Engine Crankshaft Rear Seal - Remove
C6.6 Industrial Engine Crankshaft Rear Seal - Install
C27 and C32 Engines for Caterpillar Built Machines Coolant Level Is Low
D11T Track-Type Tractor MID 082 - CID 1326 - FMI 02
C27 and C32 Engines for Caterpillar Built Machines Fan Drive
Cat® Terrain for Drilling User Guide for Drill Operator Declaration of Conformity
C6.6 Industrial Engine Flywheel Housing - Remove and Install - Standard Housing
CAESultra Glossary
777G Off-Highway Truck VIMSTM 3G and Payload Payload System
773G and 775G Quarry Trucks Chassis Electronic Control System Starting System
773G and 775G Off-Highway Truck Automatic Lubrication System (Type A1) General Information