Declaration of Conformity
Show/hide table
EC DECLARATION OF CONFORMITY OF MACHINERY     | ||||||
    | ||||||
Manufacturer: CATERPILLAR INC. 100 N.E. ADAMS STREET PEORIA, IL 61626 USA     |
||||||
Person authorized to compile the Technical File and to communicate relevant part(s) of the Technical File to the Authorities of European Union Member States on request:     |
||||||
    | Standards & Regulations Manager,Caterpillar France S.A.S 40, Avenue Leon-Blum, B.P. 55, F38041 Grenoble Cedex 9, France     |
|||||
I, the undersigned, Michael R Verheyen, hereby certify that the construction equipment specified hereunder     | ||||||
Description:     |
Generic Denomination:     | Earth-moving Equipment     |     | |||
    |
Function:     | Monitoring & Guidance     |     |     | ||
    |
Model/Type:     | DRILL 6.5     |     |     | ||
    |
Serial Number:     | DNA00001-UP     |     |     | ||
    |
Commercial Name:     | Terrain for Drilling     |     |     | ||
Fulfills all the relevant provisions of the following Directives     |     | |||||
    |
    |     |     |     |     |     |
    | Directives     | Notified Body     | Document No.     |
    | ||
    | 2004/108/EC     | N/A     | DRILL 6.5 ACN4001     |     | ||
    |     |     |     |     |     |     |
Harmonised Standards Taken Into Consideration: EN 13309, ISO 13766     |     | |||||
    |     |     |     |     |     |     |
    |     |     |     |     |     |     |
    |     |     |     |     |     |     |
Done at:     | Date:     |     | ||||
CATERPILLAR INC. 100 N.E. Adams Street AB 5410 Peoria, IL 61629 U.S.A.     |
2011-11-04     |     |
Show/hide table
Illustration 1 | g02618459 |
Show/hide table
EC DECLARATION OF CONFORMITY OF MACHINERY     | ||||||
    | ||||||
Manufacturer: CATERPILLAR INC. 100 N.E. ADAMS STREET PEORIA, IL 61626 USA     |
||||||
Person authorized to compile the Technical File and to communicate relevant part(s) of the Technical File to the Authorities of European Union Member States on request:     |
||||||
    | Standards & Regulations Manager,Caterpillar France S.A.S 40, Avenue Leon-Blum, B.P. 55, F38041 Grenoble Cedex 9, France     |
|||||
I, the undersigned, Michael R Verheyen, hereby certify that the construction equipment specified hereunder     | ||||||
Description:     |
Generic Denomination:     | Earth-moving Equipment     |     | |||
    |
Function:     | Monitoring & Guidance     |     |     | ||
    |
Model/Type:     | AMP III     |     |     | ||
    |
Serial Number:     | DNH00001-UP     |     |     | ||
    |
Commercial Name:     | Terrain for Drilling     |     |     | ||
Fulfills all the relevant provisions of the following Directives     |     | |||||
    |
    |     |     |     |     |     |
    | Directives     | Notified Body     | Document No.     |
    | ||
    | 2004/108/EC     | N/A     | TER-DOZ 101     |     | ||
    |     |     |     |     |     |     |
Harmonised Standards Taken Into Consideration: EN 13309, ISO 13766     |     | |||||
    |     | |||||
    |     | |||||
    |     | |||||
    |     | |||||
    |     | |||||
Done at:     | Date:     |     | ||||
CATERPILLAR INC. 100 N.E. Adams Street AB 5410 Peoria, IL 61629 U.S.A.     |
2011-09-15     |     |
Show/hide table
Illustration 2 | g02618459 |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Fan Drive
D11T Track-Type Tractor MID 082 - CID 1326 - FMI 02
C27 and C32 Engines for Caterpillar Built Machines Coolant Level Is Low
C6.6 Industrial Engine Crankshaft Rear Seal - Install
C6.6 Industrial Engine Crankshaft Rear Seal - Remove
C6.6 Industrial Engine Flywheel - Install
773G and 775G Off-Highway Truck Power Train Axle Mounting (Rear)
C6.6 Industrial Engine Flywheel - Remove
C27 and C32 Engines for Caterpillar Built Machines Exhaust Pipe
C6.6 Industrial Engine Water Temperature Regulator - Remove and Install
C6.6 Industrial Engine Water Pump - Install
C6.6 Industrial Engine Water Pump - Remove
C6.6 Industrial Engine Flywheel Housing - Remove and Install - Standard Housing
CAESultra Glossary
777G Off-Highway Truck VIMSTM 3G and Payload Payload System
773G and 775G Quarry Trucks Chassis Electronic Control System Starting System
773G and 775G Off-Highway Truck Automatic Lubrication System (Type A1) General Information
773G and 775G Off-Highway Truck Operator Controls
773G and 775G Off-Highway Truck Automatic Lubrication System (Type A1) Electrical System
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 1676 - FMI 05
C9.3 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
773G and 775G Off-Highway Truck Automatic Lubrication System (Type A1) Lubrication System
793F Series AC Off-Highway Truck/Tractor Braking System Connector Locations
773G and 775G Off-Highway Truck Power Train Rear Axle Housing