Differential
Show/hide table
Illustration 1 | g02178715 |
(A) Protrusion of two dowels (2) from the surface of the differential housing (1) ... 3.60 ± 0.10 mm (0.142 ± 0.004 inch)
(B) Protrusion of four dowels (4) from the surface of the differential housing (1) ... 3.96 ± 0.05 mm (0.156 ± 0.002 inch)
(C) Protrusion of two dowels (6) from the surface of the differential housing (5) ... 3.60 ± 0.10 mm (0.142 ± 0.004 inch)
Note: Rotate roller bearing assembly (3) while you are tightening the nut (7). This procedure will ensure proper seating of rollers.
Note: Refer to the Testing and Adjusting, "Differential Pinion Bearing - Adjust" for the correct adjustment procedure.
(7) Torque for four nuts ... 70 ± 15 N·m (52 ± 11 lb ft)
(8) Torque for eight locknuts ... 395 ± 40 N·m (291 ± 30 lb ft)
Caterpillar Information System:
C6.6 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C6.6 Industrial Engine Engine Oil Filter Base - Remove and Install
C6.6 Industrial Engine Inlet and Exhaust Valves - Remove and Install
C6.6 Industrial Engine Inlet and Exhaust Valve Springs - Remove and Install
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Engine Oil and Filter - Change
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Is Low
C6.6 Industrial Engine Wastegate Solenoid - Remove and Install
C6.6 Industrial Engine Electronic Unit Injector - Install
C6.6 Industrial Engine Electronic Unit Injector - Remove
C6.6 Industrial Engine Fuel Injection Pump Gear - Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Is Restricted
773G and 775G Quarry Trucks Braking System Diagnostic Code List
C6.6 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
C6.6 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
C6.6 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C6.6 Industrial Engine Engine Oil Pump - Remove
C6.6 Industrial Engine Engine Oil Pump - Install
C6.6 Industrial Engine Water Pump - Remove
C6.6 Industrial Engine Water Pump - Install
C6.6 Industrial Engine Water Temperature Regulator - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Exhaust Pipe
C6.6 Industrial Engine Flywheel - Remove
773G and 775G Off-Highway Truck Power Train Axle Mounting (Rear)
C6.6 Industrial Engine Flywheel - Install