Rollover Protective Structure (ROPS) - Remove and Install
Removal Procedure
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
- Turn the battery disconnect switch to the OFF position.
- Disconnect harness assemblies (1) for the lights, if equipped.
Show/hide table
 | |
| Illustration 1 | g01762019 |
- Disconnect harness assemblies (2) for the Product Link, if equipped.
Show/hide table
 | |
| Illustration 2 | g01762021 |
- Remove the cable straps that secure harness assemblies (2) to the platform.
- Drain the coolant from the coolant tank into a suitable container for storage or disposal. Refer to Operation and Maintenance for the proper procedure. Loosen the clamp and remove hose (3) from the coolant tank.
Show/hide table
 | |
| Illustration 3 | g01762022 |
- Attach a suitable lifting device to ROPS (4). The weight of ROPS (4) is approximately 544 kg (1200 lb).
Show/hide table
 | |
| Illustration 4 | g01762023 |
- Remove bolts (5) and ROPS (4) from the machine.
Show/hide table
 | |
| Illustration 5 | g01762024 |
Installation Procedure
- Attach a suitable lifting device to ROPS (4). The weight of ROPS (4) is approximately 544 kg (1200 lb). Place ROPS (4) into position.
Show/hide table
| | |
| Illustration 6 | g01762023 |
- Install ROPS (4) and bolts (5). Remove the suitable lifting device.
Show/hide table
| | |
| Illustration 7 | g01762024 |
- Install hose (3) to the coolant tank and tighten the clamp. Fill the cooling tank with coolant. Refer to Operation and Maintenance for the correct procedure.
Show/hide table
| | |
| Illustration 8 | g01762022 |
- Connect harness assemblies (2) for the Product Link, if equipped.
Show/hide table
| | |
| Illustration 9 | g01762021 |
- Install the cable straps in order to secure harness assemblies (2) to the platform.
- Connect harness assemblies (1) for the lights, if equipped.
Show/hide table
| | |
| Illustration 10 | g01762019 |
- Turn the battery disconnect switch to the ON position.
Caterpillar Information System:
CB54 and CB64 Asphalt Compactors Machine Systems Spray Bar - Remove and Install
2290 Track Feller Buncher, 2390 Track Feller Buncher, 2391 Track Feller Buncher and 2491 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
CB54 and CB64 Asphalt Compactors Machine Systems Steering Wheel - Remove and Install
2008/12/22 A New Oil Gauge Is Now Used on 950H, 962H, and IT62H Wheel Loaders {1326}
793F and 797F Off-Highway Trucks Braking System Electrical Output Components
2009/01/19 New Pivot Kits Are Available For Steering Columns {4310, 4338}
2008/12/22 A New Heater Lines Group is Used {1812, 7304, 7304, 7320}
2008/12/22 An Improved Steering Column Is Now Available {4310, 4338, 4343}
2008/12/22 New Lock Washers Are Used {1150, 1201}
793F and 797F Off-Highway Trucks Braking System Electrical Input Components
C7 Engines for Caterpillar Built Machines Configuration Parameters
C7 Engines for Caterpillar Built Machines Electrical Connectors
CB54 and CB64 Asphalt Compactors Machine Systems Operator Platform - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Electronic Control System MID 039 - CID 1618 - FMI 04
2590 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
2008/12/22 The Implement Pump Pressure Sensor is Now Relocated {1439, 5070}
MT4400D AC Off-Highway Truck Additional Messages
C175-16 Engine for 795F Series AC Off-Highway Trucks Turbocharger Support
2009/01/05 An Improved Pressure Control Valve Is Now Used In the Transmission {3073, 3074}
2009/03/02 An Improved Grommet And An Improved Harness Are Now Used In The Cab {1429, 1430, 1432, 1434, 7329}
2009/02/09 Improved Torque for the Idler Wheel Groups {4159}
2008/12/29 Operation and Maintenance Manuals Are Updated to Include Maintenance Procedure for Cylinders and a Note Regarding Backhoe Bucket Interference {5102, 5105, 5468, 5808, 6119, 7000, 7222}
2590 Track Feller Buncher Machine Systems Piston Pump (Main Hydraulic)
AccuGrade For Wheel Tractor-Scrapers Option Key