A New Oil Gauge Is Now Used on 950H, 962H, and IT62H Wheel Loaders {1326}
- Integrated Toolcarrier:
- IT62H (S/N: M5G1-UP)
- Wheel Loader:
- 950H (S/N: N1A1-UP; M1G1-UP; J5J1-UP; K5K1-UP)
- 962H (S/N: N4A1-UP; M3G1-UP; J6J1-UP; K6K1-UP)
Description of Change: The new oil gauge is designed for extended service life and durability.
Adaptable To: 334-5273 Oil Level Gauge As is a direct replacement for the 321-2002 Oil Level Gauge As .
Note: Machines that were originally assembled with the 248-0369 Oil Level Gauge Gp (Dipstick) will need to be updated to the 308-0948 Oil Level Gauge Gp (Dipstick) in order for the 334-5273 Oil Level Gauge As to fit properly.The new oil gauge assembly is adaptable back to the first production of the above listed machines. Refer to Table 1 for a list of effective serial numbers.
Show/hide table
Effective Engine Serial Numbers     |
S/N:KHX16049-UP     |
S/N:C7C13294-UP     |
Note: The effective engine serial numbers that are shown in Table 1 are used in the above listed machines.
Caterpillar Information System:
793F and 797F Off-Highway Trucks Braking System Electrical Output Components
2009/01/19 New Pivot Kits Are Available For Steering Columns {4310, 4338}
2008/12/22 A New Heater Lines Group is Used {1812, 7304, 7304, 7320}
2008/12/22 An Improved Steering Column Is Now Available {4310, 4338, 4343}
2008/12/22 New Lock Washers Are Used {1150, 1201}
793F and 797F Off-Highway Trucks Braking System Electrical Input Components
C7 Engines for Caterpillar Built Machines Configuration Parameters
C7 Engines for Caterpillar Built Machines Electrical Connectors
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 07
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 04
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 03
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 02
CB54 and CB64 Asphalt Compactors Machine Systems Steering Wheel - Remove and Install
2290 Track Feller Buncher, 2390 Track Feller Buncher, 2391 Track Feller Buncher and 2491 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
CB54 and CB64 Asphalt Compactors Machine Systems Spray Bar - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Systems Operator Platform - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Electronic Control System MID 039 - CID 1618 - FMI 04
2590 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
2008/12/22 The Implement Pump Pressure Sensor is Now Relocated {1439, 5070}
MT4400D AC Off-Highway Truck Additional Messages
C175-16 Engine for 795F Series AC Off-Highway Trucks Turbocharger Support
2009/01/05 An Improved Pressure Control Valve Is Now Used In the Transmission {3073, 3074}
2009/03/02 An Improved Grommet And An Improved Harness Are Now Used In The Cab {1429, 1430, 1432, 1434, 7329}