Steering Wheel - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 145-5242     | Puller Gp     | 1     |
- Remove cap (2) from steering wheel (1) .
Show/hide table
Illustration 1 | g01761800 |
- Disconnect harness assembly (4) from cap (2) .
Show/hide table
Illustration 2 | g01761801 |
- Remove the bolt and harness assembly (3) from steering wheel (1). Place cap (2) out of the way.
- Remove nut (5) and use Tooling (A) to remove steering wheel (1) from the steering column.
Show/hide table
Illustration 3 | g01761802 |
Installation Procedure
- Install steering wheel (1) on nut (5) on the steering column.
Show/hide table
Illustration 4 | g01761802 |
- Install harness assembly (3) and the bolt to steering wheel (1) .
Show/hide table
Illustration 5 | g01761801 |
- Connect harness assembly (4) to cap (2) .
- Install cap (2) on steering wheel (1) .
Show/hide table
Illustration 6 | g01761800 |
Caterpillar Information System:
2008/12/22 A New Oil Gauge Is Now Used on 950H, 962H, and IT62H Wheel Loaders {1326}
793F and 797F Off-Highway Trucks Braking System Electrical Output Components
2009/01/19 New Pivot Kits Are Available For Steering Columns {4310, 4338}
2008/12/22 A New Heater Lines Group is Used {1812, 7304, 7304, 7320}
2008/12/22 An Improved Steering Column Is Now Available {4310, 4338, 4343}
2008/12/22 New Lock Washers Are Used {1150, 1201}
793F and 797F Off-Highway Trucks Braking System Electrical Input Components
C7 Engines for Caterpillar Built Machines Configuration Parameters
C7 Engines for Caterpillar Built Machines Electrical Connectors
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 07
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 04
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 03
2290 Track Feller Buncher, 2390 Track Feller Buncher, 2391 Track Feller Buncher and 2491 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
CB54 and CB64 Asphalt Compactors Machine Systems Spray Bar - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Systems Operator Platform - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Electronic Control System MID 039 - CID 1618 - FMI 04
2590 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
2008/12/22 The Implement Pump Pressure Sensor is Now Relocated {1439, 5070}
MT4400D AC Off-Highway Truck Additional Messages
C175-16 Engine for 795F Series AC Off-Highway Trucks Turbocharger Support
2009/01/05 An Improved Pressure Control Valve Is Now Used In the Transmission {3073, 3074}
2009/03/02 An Improved Grommet And An Improved Harness Are Now Used In The Cab {1429, 1430, 1432, 1434, 7329}
2009/02/09 Improved Torque for the Idler Wheel Groups {4159}